LSI SNMP Trap Logger Application for Windows

NOTE TO SERVICE - Reference RETAIN #NA

(C) Copyright International Business Machines Corporation 1999, 2005. All rights reserved.
US Government Users Restricted Rights - Use, duplication, or disclosure restricted by GSA 
ADP Schedule Contract with IBM Corp.

Note: Before using this information and the product it supports, read the general information 
in "Notices and trademarks” in this document.


CONTENTS
________

1.0  Overview
2.0  Installation and setup instructions
3.0  Configuration information 
4.0  Unattended mode
5.0  Web information and support phone Number
6.0  Notices and trademarks
7.0  Disclaimer


1.0  Overview
________________________



        1.1     The LSI SNMP Trap Logger application collects SNMP traps from the
                LSI SNMP Agent on Windows and Linux systems having one or more LSI
                SAS IR Controller installed (LSI SAS 1064/1068 family of
                controllers). After collecting the trap and retrieving the required
                information from the trap, the LSI SNMP Trap Logger application
                writes the information to the system log.  
 
                The LSI Trap Logger application has a popup functionality using
                that the application additionally alerts the user with a popup
                window informing that an event is written to the system log. 
 
                The LSI SNMP Trap Logger application runs as a Windows Service on
                the Windows operating system and runs as a daemon process on the
                Linux operating system.
 
        
        1.2     Limitations
                - none

        1.3     Enhancements
                - none

        1.4.    Level of Recommendations and Prerequisites for the
                update:
                - none

        1.5     Dependencies:
                - LSI SAS IR SNMP Agent must be loaded.



2.0  Installion and setup instructions
______________________________________
   

Follow the given steps to install the LSI SNMP Trap Logger application: 
 
Step 1: Make sure your operating system is one of the following: 
 
   - Windows 2000 X86  
   - Windows 2003 X86 
   - Windows 2003 X64 
   - Windows XP X86   
   - Windows XP X64
 
Step 2: Make sure that you have installed the Windows SNMP services. 
 
 
Step 3: Check to see if the Windows SNMP service is running. You can use the following 
commands at the MS-DOS prompt to start and stop the Windows SNMP service: 
 
net start snmp  (Use this to start Windows SNMP service) 
net stop snmp  (Use this to stop Windows SNMP service) 
 
 
Step 4: Install the LSI Logic SAS IR SNMP Agent. Make sure it is running and active. 
 
 
Step 5: You can install the LSI Logic Trap Logger by running the given installation program: 
    
   LSI_TrapLogger.exe 
 
Please follow the on screen instructions to complete the installation. 
 
Step 6: Check to ensure that the following service is installed and started: 

   LSITrapLogger  
 
Step 7: Go to the Property of the service by double clicking on it. Go to the 
tab "Recovery". Select the option "Restart the Service" from the  
dropdown menu for "First Failure". See the "Screenshot.bmp" image  
bundled with the installer for help. 
    


3.0     Configuration information
__________________________________
		
		N/A


4.0     Unattended Mode
________________________

		N/A


5.0     Web information and support phone number
_________________________________________

        5.1     IBM Support Web Site:
                http://www.ibm.com/support/.
       		
     		For a list of supported operating systems on legacy (non-shipping) 
     		controllers, see http://www.ibm.com/servers/eserver/serverproven/compat/us/.

		You can receive hardware service through IBM Services or through your IBM
           	reseller, if your reseller is authorized by IBM to provide warranty service. See
           	http://www.ibm.com/planetwide/ for support telephone numbers, or in the U.S.
            	and Canada, call 1-800-IBM-SERV (1-800-426-7378).

            	In the U.S. and Canada, hardware service and support is available 24 hours a day,
            	7 days a week. In the U.K., these services are available Monday through Friday,
            	from 9 a.m. to 6 p.m.


        5.2     IBM eserver xSeries Web Site:
                http://www.ibm.com/eserver/xseries

        5.3     If you have any questions about this update, or problems applying the update, 
		go to the following Help Center World Telephone Numbers and URL:
                http://www.pc.ibm.com/qtechinfo/YAST-3P2QYL.html.


6.0.    Notices and trademarks 
______________________________

        6.1     The following terms are trademarks of the IBM 
                Corporation in the United States, or other countries
                or both:
                            * IBM
                            * Advanced System Management

                Other company, product, and service names may be
                trademarks or service marks of others.

7.0.    Disclaimer
__________________

        7.1     THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF
                ANY KIND.  IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS
                OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED
                WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
                MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN
                THIS DOCUMENT.  BY FURNISHING THIS DOCUMENT, IBM
                GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS.TH RESPECT TO THE INFORMATION IN
                THIS DOCUMENT.  BY FURNISHING THIS DOCUMENT, IBM
                GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS.S.