IBM Intellistation M Pro 6850 Flash Update Diskette
                    Version DAE121A
                 Installation README File



CONTENTS
________

       1.0   Overview
       2.0   Change History
       3.0   Installation and Setup Instructions
       4.0   Configuration Information
       5.0   Unattended Mode
       6.0   Web Sites and Support Phone Number
       7.0   Trademarks and Notices
       8.0   Disclaimer

       1.0   Overview

              1.1  This README file contains the latest information about installing
                   the IBM Intellistation M Pro (6850) POST/BIOS code.

              1.2  Limitations - NA

              1.3  Enhancements - NA

              1.4  Level of Recomendations and Prerequisites for the Upate:

              1.5  Dependencies

        2.0   Change History
	    
		BIOS Version DAE121A - Initial release for Web. 
				     - Changes to syncronize BIOS revision level in Setup			  


        3.0   Installation and Setup Instructions

              The procedure to update the POST/BIOS is as follows:

              3.1  Insert the "IBM Intellistation E Pro POST/BIOS
                   Flash Diskette" into drive A.

              3.2  Start up or restart your IBM system.

              3.3  The system will boot off of the diskette.

              3.4  You will then be asked if you would like to save the current
                   code to a diskette.  If you select 'Y', you need to name
                   the file to be saved. The file will be saved on the diskette.
                   If you select 'N', the utility will continue to the next step.

              3.5  At this point, you will be asked if you would like to continue the
                   POST/BIOS flash update. If you select 'Y', the system will update
                   the flash ROM with the new code.  When this is complete the
                   system will automatically restart.
	
	      3.6  On the first system boot, after updating the BIOS, select the Setup Utility 
		   with the F1 key; then, select the "Load Optimized Defaults" option.
		   Select the "Save & Exit Setup" option, and, finally, accept the displayed "Y"
		   option under "Save to CMOS and Exit (Y/N) ? Select Y.  


       4.0  Configuration Information

       5.0  Unattended Mode

             5.1   Steps for unattended mode.

                    5.1.1  Modify CONFIG.SYS on the Flash Diskette to read:
                          "SHELL=FLASH2.EXE (filename) /py /sn"
                    5.1.2  Reboot the system with the Flash Diskette in Drive A:


       6.0  Web Sites and Support Phone Number

              6.1   IBM Support Web Site:
                     http://www.pc.ibm.com/support

              6.2   IBM Marketing Intellistation Web Site:
                     http://www.pc.ibm.com/intellistation

              6.3   If you have any questions about this update, or problems
                    applying the update go to the following Help Center World
                    Telephone Numbers URL:
                     http://www.pc.ibm.com/qtechinfo/YAST-3P2QLY.html.


       7.0  Trademarks and Notices

             THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY
             KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR
             IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED
             WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
             MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS
             DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES
             TO ANY PATENTS OR COPYRIGHTS.


       8.0  Disclaimer