File Name: readme.txt IBM Enhanced Diagnostics Diskette System 8647/6221 Version 1.05, Build ID: OPYT21A CONTENTS --------- 1.0 Overview 2.0 Change History 3.0 Starting the Diagnostics Program 4.0 Navigating in the Diagnostics Program 5.0 Running Diagnostic Tests 6.0 Web Sites and Support Phone Number 7.0 Trademarks and Notices 8.0 Disclaimer 1.0 Overview -------------- 1.1 Overview about this code This README file contains the latest information about the IBM 8647/6221 Enhanced Diagnostics. 1.2 Limitations N/A 1.3 Enhancements N/A 1.4 Level of Recommendations and Prerequisites for the Update N/A 1.5 Dependencies N/A 2.0 Change History -------------------- 2.1 Version 1.05 - OPYT21A - Added support for new revision of Broadcom ethernet chip 2.2 Version 1.04 - fixed a problem where the memory test failed on DIMMs mapped above 4GB 2.3 Version 1.03 - fixed a problem where the ServeRAID Controller test was not being run when normal tests were selected 2.4 Version 1.02 - fixed a problem where the ServeRAID HD Read/Verify test was always disabled 2.5 Version 1.01 - Added Remote Supervisor Adapter support 2.6 Version 1.00 - Initial Release 3.0 Starting the Diagnostics Program -------------------------------------- 3.1 To start the diagnostics program from a diskette, do the following: - Shut down and turn off the computer. - Wait 10 seconds. - Insert the diagnostics diskette into diskette drive A. - Turn on the computer. 3.2 To start the diagnostics program from a CD, do the following: - Make sure that the CD-ROM drive is in the startup sequence for your computer. - With the computer turned on, insert the diagnostics CD into the CD-ROM drive. - Shut down and turn off the computer. - Wait 10 seconds. - Turn on the computer. - When the menu appears, select "Run IBM Enhanced Diagnostics" 4.0 Navigating in the Diagnostics Program ------------------------------------------- You can use either the mouse or the keyboard to navigate in the diagnostics program. To select an item with the mouse, click the item. To use the keyboard: - Use the cursor-movement keys to highlight an item. - Press the Enter key to select a highlighted item. - Press the Esc key to return to the previous screen or menu. - Press the F1 key to display online help. 5.0 Running Diagnostic Tests ------------------------------ To run the diagnostic tests, you select items from a list of test categories. The first two items in the list are Run Normal Test and Run Quick Test. Run Normal Test runs a predefined set of tests from the list of categories; Run Quick Test runs a subset of those tests and takes less time to run. To run diagnostic tests, do the following: ` - From the toolbar, select Enhanced. A list of all the test categories appears. - Select and run diagnostic tests in any of the following ways: o Select Run Normal Test or Run Quick Test to run a predefined set of tests. o Select any category from the list. In the list of tests that appears, selected tests are indicated by check mark. To select or deselect a test, click beside the test, or highlight the test and press the Spacebar. Press Ctrl+Enter to run all the selected tests in the category, or exit from that category and display another category to make additional selections. When you have finished making your selections, press F5 to run all selected tests in all categories. o Select any category from the list. In the list of tests that appears, select one test. This runs only that test. - To stop a test at any time, press Esc. - As each test runs, the test results (N/A, PASSED, FAILED, ABORTED) are displayed on the screen, beside each test name. Test results are also entered into a test log file. 6.0 WEB Sites and Support Phone Number ---------------------------------------- 6.1 IBM Support Web Site: http://www.pc.ibm.com/support 6.2 IBM Marketing eserver Web Site: http://www.ibm.com/eserver/xseries 6.3 If you have any questions about this update, or problems applying the update go to the following Help Center World Telephone Numbers: 800-IBM-SERV (800-426-7378) Hardware Support #: 800-426-4378 Software Support #: 800-237-5511 6.4 Website for the World Wide Support Phone list: http://www.pc.ibm.com/qtechinfo/YAST-3P2QYL.html. 6.5 Intellistation web site http:www.pc.ibm.com/intellistation 7.0 Trademarks and Notices ---------------------------- N/A 8.0 Disclaimer ---------------- 8.1 THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. 8.2 Note to Government Users Note to U.S. Government Users -- Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corporation.