IBM ThinkPad August 19, 2004 Wireless LAN Software for Cisco Wireless LAN MiniPCI Card for Windows 98/98 SE/Me/2000/XP for ThinkPad Package Version 3.8.26.01 Driver Version 3.8.26 Firmware Version 5.41 Utility Version 6.03.011 ====================================================================== WHAT THIS PACKAGE DOES ---------------------- This package provides the Wireless LAN driver, Utility Software, and Firmware for Cisco Wireless LAN Mini PCI Card for Microsoft Windows 98/98 SE/Me/2000/XP. For Windows NT 4.0, please use the following package: Wireless LAN Software for Cisco Wireless LAN MiniPCI Card for Windows NT 4.0 for ThinkPad The Wireless LAN driver enables or updates the Wireless LAN function of the following ThinkPad computers with the following adapters - Cisco Wireless LAN Mini PCI Card. This release supports the following systems: - ThinkPad T30(*1)/T40(*2)/T40p(*3)/T41(*2)/T41p(*3)/T42(*2)/T42p(*3) - ThinkPad X30(*2)/X31(*2) - ThinkPad R32(*2)/R40(*2) NOTES: *1: Only the following T30 models support the Windows Me: 2366/2367-x1x, x2x, x3x, x4x, x5x, A6x and A7x except for M1x, M2x, M3x, M4x and M5x. *2: Windows Me is not supported. *3: Supports Windows 2000/XP. To determine if you should update the Wireless LAN driver, refer to the "Summary of Changes" section. To update the Wireless LAN driver, refer to the "Installation Instructions" section. If you use IBM Access Connections, to keep software compatibility, please update it to the version 3.30 or later. RELEASED VERSIONS ----------------- Version 2.2.2 Supports ThinkPad T30 Version 3.4.9 Fixes several problems. Added support for ThinkPad X30 Version 3.5.13 Added support for ThinkPad R32, R40, X31, T40, T41, T41p, T42, T42p Version 3.8.26 Added support for WPA (Windows 2000/XP Only) Version 3.8.26.01 Fixed a problem. SUMMARY OF CHANGES ------------------ Where: Build number (for example, 21246 means Build 21246) (New) New function or enhancement (Fix) Correction to existing function <2.2.2> - (New) Initial release for ThinkPad T30 <3.4.9> - (Fix) On Windows98, CPU usage is always 100% when ACU is installed, and the battery life becomes shorter. - (Fix) On WindowsXP, Hibernation function does not work when ACU is opened with radio off. - (Fix) Some wording change in on-line manual and ACU. - (Fix) Firmware update to improve roaming flexibility. - (New) Added support for ThinkPad X30 <3.5.13> - (New) Added support for ThinkPad R32, R40, X31, T40, T41, T41p, T42, T42p <3.8.26> - (New) Added support for WPA (Windows 2000/XP Only) <3.8.26.01> - (Fix) When you run IWSETUP.EXE to install this package, you will receive the error message. Note: Only the installation related part has been changed with this release. You do not need to update the driver, if you already updated the driver to version 3.8.26 successfully. Installation instructions ------------------------- NOTE: ThinkPad Software Installer provides install and uninstall wizards for this Driver for the following operating systems: - Microsoft Windows 98(SE) - Microsoft Windows Me - Microsoft Windows 2000 - Microsoft Windows XP Caution: This Driver will automatically update your card's Firmware upon installation and during reboot of the system. Do not power off the system at any time during Driver installation and reboot to prevent the card's Firmware from corruption. Windows 98(SE)/Me NOTES: Device drivers for Windows 98/Me are located in \PCC-MPI\9x-Me-2K subdirectory. Update install To update the driver: 1. Start Windows 98/Me. 2. Extract this package onto the hard disk drive. 3. Click Start, select Settings, and then click Control Panel. 4. Double-click the System icon. For Windows Me, it may be necessary to click view all Control Panel options. 5. Click the Device Manager tab. 6. Click the + mark to expand Network adapters or Other devices. 7. Right-click Cisco Systems PCI Wireless LAN Adapter in the Network adapters section or PCI Network Controller in the Other devices section and then click Properties. 8. Click the Driver tab. 9. Click the Update Driver button. 10. For Windows Me only, select Specify the location of the driver (Advanced). 11. Click the Next button in Update Device Driver Wizard dialog box. 12. For windows 98 only, select Search for a better driver than the one your device is using now.(Recommended) and then click Next. 13. Select Specify a location: only. 14. Specify the path with the full path name where you extracted the package in step 2 in the Specify a location: box and then click Next. 15. For windows 98 only, Click Next. 16. Click Next. The driver installation starts. 17. Click Finish when the installation completes. 18. Click Yes when prompted to restart the computer. Clean install: (Add New Hardware Wizard) If this is the first time booting Windows after installing the Cisco Wireless LAN Mini-PCI card in the computer, then Windows will detect the card automatically. To install the device driver: 1. Extract this package onto the hard disk drive. 2. Start Windows 98/Me. The Add New Hardware Wizard dialog box is displayed. 3. For Windows Me only, Select Specify the location of the driver (Advanced). 4. Click Next. 5. For Windows 98 only, Select Search for the best driver for your device. (recommended) and then click Next. 6. Select Specify a location: only. 7. Specify the path with the full path name where you extracted the package in the step 1 in the Specify a location: box and then click Next. 8. For Windows 98 only, Click Next. 9. Click Next. The driver installation starts. 10. Click the Finish button when the installation completes. 11. Click Yes when prompted to restart the computer. Windows 2000 Update install To update the driver: 1. Start Windows 2000. 2. Extract this package onto the hard disk drive. 3. Click Start, select Settings, and then click Control Panel. 4. Double-click the System icon. 5. Click the Hardware tab. 6. Click the Device Manager button. 7. Click the + mark to expand Network adapters or Other devices. 8. Right-click Cisco Systems PCI Wireless LAN Adapter in the Network adapters section or Network Controller in the Other devices section and then click Properties. 9. Click the Driver tab. 10. Click the Update Driver button. 11. Click Next in the Upgrade Device Driver Wizard dialog box. 12. Select Search for a suitable driver for my device (recommended) and then click Next. 13. Select Specify a location only in Optional search locations:. 14. Click Next button. 15. Specify the path to sub-directory \PCC-MPI\9x-Me-2K with the full path name where you extracted the package in the step 2 in Copy manufacturer's files from:. 16. Click OK. 17. Click Next. After this step, the installer may display a "Digital Signature not found" message. Click Yes if this message appears. The driver installation starts. 18. Click the Finish button when the installation completes. 19. Restart the computer. Clean install: (Found New Hardware Wizard) If this is the first boot of Windows 2000 after installing the Cisco Wireless LAN Mini-PCI Card in the computer, the Windows 2000 detects the card automatically. To install the device driver: 1. Extract this package onto the hard disk drive. 2. Start Windows 2000. The Found New Hardware Wizard dialog box is displayed. 3. Click Next. 4. Select Search for a suitable driver for my device (recommended) and then click Next. 5. Select Specify a location only in Optional search locations: and then click Next. 6. Specify the path to sub-directory \PCC-MPI\9x-Me-2K with the full path name where you extracted the package in the step 1 in Copy manufacturer's files from:. 7. Click OK. 8. Click Next. After this step, the installer may display a "Digital Signature not found" message. Click Yes if this message appears. The driver installation starts. 9. Click the Finish button when the installation completes. 10. Restart the computer. Windows XP Update install To update the driver: 1. Start Windows XP. 2. Extract this package onto the hard disk drive. 3. Click Start and then click Control Panel. 4. Click the Performance and Maintenance icon and then click the System icon. 5. Click the Hardware tab. 6. Click the Device Manager button. 7. Click the + mark to expand Network adapters or Other devices. 8. Right-click Cisco Systems PCI Wireless LAN Adapter in the Network adapters section or Network Controller in the Other devices section and then click Properties. 9. Click the Driver tab. 10. Click the Update Driver button. 11. Select Install from a list or specific location (Advanced) and then click Next. 12. Select Search for the best driver in these locations. 13. Select Include this location in the search only. 14. Specify the path to sub-directory \PCC-MPI\XP with the full path name where you extracted the package in the step 2 in Copy manufacturer's files from: and then click Next. The Driver installation starts. After this step, the installer may display a "Digital Signature not found" message. Click Continue Anyway if this message appears. 15. Click the Finish button when the installation completes. 16. Restart the computer. Clean install: (Found New Hardware Wizard) If this is the first time booting Windows XP after installing the Cisco Wireless LAN Mini-PCI Card in the computer, Windows XP will detect the card automatically. To install the device driver, follow the instructions below. 1. Extract this package onto the hard disk drive. 2. Start Windows XP. The Found New Hardware Wizard dialog box is displayed. 3. Select Install from a list or specific location (Advanced) and click Next. 4. Select Search for the best driver in these locations. 5. Select Include this location in the search only. 6. Specify the path to sub-directory \PCC-MPI\XP with the full path name where you extracted the package in the step 1 in Copy manufacturer's files from:. 7. Click Next. The Driver installation starts. After this step, the installer may display a "Digital Signature not found" message. Click Continue Anyway if this message appears. 8. Click the Finish button when the installation completes. 9. Restart the computer. Aironet Client Utility 1. Start Windows. 2. Click Start and then click Run. 3 In the Run dialog window, specify IWSETUP.EXE with the full path name where you extracted the package in the step 2, and click OK. 4. Follow the instructions on the screen. 5. Restart the system. Firmware 1. Open Aironet Client Utility. 2. Click the Load Firmware icon. 3 Specify the file name of the Firmware with the full path name where you extracted the package in the step 2, and click OK. File Name: pcx504b.img Sub-directory: \PCC-MPI\Firmware Determining which version is installed -------------------------------------- To check the version of the firmware/device driver that is installed on your system: 1. Start Aironet Client Utility 2. Click Status icon. 3. Check Firmware Version/NDIS Driver Version. Utility Version determining To check the version of the Utility Software that is installed on your system: 1. Open Aironet Client Utility 2. Click Help, then click About Aironet Client Utility. Tips for LEAP Authentication ---------------------------- To utilize LEAP authentication, it is required to install Cisco Aironet Client Utility(ACU) with LEAP authentication feature selected. Please run the SETUP.EXE to install ACU and choose the "LEAP" option at Select Options menu of the installer. Trademarks ---------- * IBM and ThinkPad are registered trademarks of IBM Corporation. * Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.