ThinkPad March, 27, 2007 2.5 inch SATA Hard Drive Firmware Update Utility Release FWSH05 ======================================================================== Note: This firmware update includes the fix for the case on a system with Windows Vista, that the system may become to display the following error message at each power on, and then cannot boot from the hard drive. "2100: Initialization error on HDD0 (Main hard disk drive)" Note: Please apply FWSH04 or later release or Windows Vista will blue screen and stop. If you have applied FWSH02(now discarded) with Toshiba MKxx32GSX or MKxx34GSX and plan to install Windows Vista. Contents of this document ------------------------- - What This Package Does - Support Information - Released Versions - Summary of Changes - Making a CD-R or CD-RW to use - Prepare the boot device - Installation Guide - Trademarks What This Package Does ---------------------- This utility will examine your system configuration and detect all 2.5 inch SATA Hard Drives (HDD) installed in your ThinkPad. SATA, Serial AT Attachment is a new form of device interface for storage devices. It will then check the firmware revision of the hard drive and judge whether your system requires a firmware update or not. If required, it will prompt you to run the appropriate firmware update program for your drive. This package is compiled into an ISO format, which is compatible with CD writing software such as RecordNow!(*), and writable to a CD-R or a CD-RW disc. * If your RecordNow! CD writing program does not have a "Burn Image" entry, please upgrade RecordNow! from following site. http://www.lenovo.com/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-43887 A written CD-R or CD-RW disc will be bootable. It will boot from your ThinkPad Optical Disc Drive(*) and run the update utility program. * Your ThinkPad may need to change the boot device setting to boot from an Optical Disc Drive. (See the "Prepare boot device" section in this document) Support Information ------------------- This package provides firmware for the following Hard Drives. "x" means one or more characters. "|" means new to this release. Toshiba MKxx32GSX Toshiba MKxx34GSX Fujitsu MHV2xxxBH Fujitsu MHV2xxxBH PL | Hitachi HTS5410xxG9SA00 | Hitachi HTS7210xxG9SA00 | Hitachi HTS5416xxJ9SA00 The list of ThinkPads may support those Hard Drives: ThinkPad R60, R60e ThinkPad T60, T60p ThinkPad X60, X60s, X60 Tablet ThinkPad Z60m, Z60t ThinkPad Z61e, Z61m, Z61p, Z61t Released Versions ----------------- FWSH01 Initial Release (Mar. 17, 2006) FWSH03 New drive firmware (Jan. 12, 2007) FWSH04 New drive firmware (Feb. 19, 2007) FWSH05 New drive firmware (Mar. 27, 2007) Summary of Changes ------------------ Model Firmware ---------------- -------- [ Toshiba ] MKxx32GSX ASxx4E Model Firmware ---------------- -------- [ Fujitsu ] MHV2xxxBH 00840029 MHV2xxxBH PL 0084002A [ Hitachi ] HTS5410xxG9SA00 C60R HTS7210xxG9SA00 C10V HTS541616J9SA00 C7EP Model Firmware ---------------- -------------- [ Toshiba ] MKxx32GSX ASxx4E MKxx34GSX AHxx1E, AHxx2E Important: Please apply FWSH04 or Windows Vista will go blue screen and stop, if you have applied FWSH02(now discarded) with Toshiba MKxx32GSX or MKxx34GSX and plan to install Windows Vista. Model Firmware ---------------- -------------- [ Hitachi ] HTS5410xxG9SA00 C65R HTS7210xxG9SA00 C14V HTS5416xxJ9SA00 C7JP Important: This firmware update includes the fix for the case on a system with Windows Vista, that the system may become to display the following error message at each power on, and then cannot boot from the hard drive. "2100: Initialization error on HDD0 (Main hard disk drive)" Making a CD-R or CD-RW disc to use ---------------------------------- This section provides instructions using the RecordNow! program to make a bootable CD. Please refer to your other product manuals when using other CD writing programs. 1. Make sure you have a ThinkPad with a CD-RW, DVD/CD-RW combo or DVD multi drive installed. Prepare a blank CD-R or CD-RW disc. 2. Download the FWSH05.ISO file from the Lenovo/IBM web site. 3. Run RecordNow! from the Windows Start/Programs menu. 4. Click Backup Projects from the tabs. (right most tab) 5. Click "Burn Image" project. Follow the process. 6. Choose the obtained ISO file in step 2 of this process to create your CD. Prepare the boot device ----------------------- The resulting CD-R or CD-RW disc includes an operating system and is bootable on the supported ThinkPad models. Note: The Hard Drive Firmware Update Utility bootable CD does not support USB Optical Disc Drives, PCMCIA/CardBUS Optical Disc Drives, Optical Disc Drives in a Docking Station bay, or any other drives other than the Optical Disc Drive in the ThinkPad UltraBay. Other drives will not be updated correctly by this firmware update utility. Please confirm that an Optical Disc Drive is in the boot device list of your BIOS setup. 1. Power off the ThinkPad, if it is turned on. 2. Power on the ThinkPad. 3. Press the F1 key to enter the BIOS Setup Utility when the "ThinkPad" logo is seen on the screen. 4. Choose "Startup" from the menu 5. Choose "Boot" from the menu(*) 6. In "Boot Priority Order", set "ATAPI CD0" to the top of the list, "1". 7. Press F10 to save the new setup. 8. Power off or restart the system. *Note: Please write down the current boot priority order for restoration later if you need to modify your boot list. Installation instructions ------------------------- After the above sections "Making a CD-R or CD-RW disc to use" and "Prepare the boot device" have been completed, follow these steps. Please connect the AC adapter and use a fully charged battery to power the ThinkPad system during the update. This will avoid an accidental lost of power. Important Notice: Please REMOVE hard drive password. Otherwise firmware can't be updated with error message. Note: Install only one Hard Drive into your ThinkPad. 1. Place the CD-R or CD-RW disc you created in "Making a CD-R or CD-RW disc to use" section into your ThinkPad Optical Disc Drive. 2. Boot the system with the Firmware Update Utility. 3. Drives that have been detected will be listed in the upper area of the Main Menu. If a drive that requires an update is detected, it will be shown with a blinking mark on the left. If you find no blinking mark, your Hard Drive has the latest firmware and there is no need to update or the update firmware is not valid for your drive. Remove the Firmware Update Utility and shutdown your ThinkPad. 4. Follow the instructions on the screen to update the necessary drives. 5. When the installation is complete, remove the Firmware Update Utility CD or CD-RW from the Optical Disc Drive and power off your ThinkPad system. Do not restart the ThinkPad system with the Ctrl-Alt-Delete keys. 6. Enter BIOS Setup Utility again, if you need to restore your original boot order and/or a hard drive password. Attention: Please do not power off the ThinkPad during the firmware update, or your Hard Drive may NOT be usable anymore. Notes: - The update utility will not find a Hard Drive in a Docking Station In this case, please remove the drive and install it into a Hard Drive bay in your ThinkPad. If you encounter a problem installing a Hard Drive into your ThinkPad, please call your local Help Center. - The utility contains several executable files, but DO NOT RUN THESE PROGRAMS. Running these programs manually could ruin your drive. - The Hard Drive Firmware Update Utility does not support a suspend/hibernation/resume feature of the ThinkPad while the firmware update utility is running. Please do not use Fn-F4 or equivalent functions. Trademarks ---------- * ThinkPad is a registered trademark of Lenovo. * IBM is a registered trademark of IBM Corporation. * Windows Vista is a registered trademark of Microsoft Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.