IBM ThinkPad                                             July 24, 2002
Ethernet Features II for Windows 98

Version 6.01.03.0000
======================================================================

Notice:
-------
This program is language independent and can be used with any language 
system.


What This Package Does
-----------------------
This package provides the Ethernet driver and the PROSET utility 
program for Windows 98 users.

This release supports the following systems:

   - ThinkPad R32

To determine if you need to update the Ethernet driver, refer to
the "Summary of Changes" section below.

To update the Ethernet driver, refer to the "Installation 
instructions" section below.

Released Version
----------------
Version 6.01.03.0000       Initial release


Summary of Changes
------------------
  Key: <n.nn>  Program version (for example, 1.00 means Version 1.00)
        (New)  New function or enhancement
        (Fix)  Correction to existing function

<6.01.03.0000>
- (New) Support for ThinkPad R32.


Installation instructions
-------------------------
Update Install 
 1. Start Windows 98.
 2. Extract this package onto the hard disk drive.
 3. Click Start, select Settings, then click Control Panel.
 4. Double-click System icon.
 5. Click Device Manager tab.
 6. Click the + mark to expand Network adapters.
 7. Right-click "Intel(R) PRO/100VE Network Connection in Network 
    adapters" and click Properties.
 8. Click Driver tab.
 9. Click Update Driver button.
10. Click Next button in Update Device Driver Wizard dialog box.
11. Select Search for a better driver than the one your device is
    using now.(Recommended).
12. Click Next button.
13. Select Specify a location: only.
14. Specify the directory name with the full path name where you
    extracted the package in the step 2 in Specify a location:.
15. Click Next button.
16. Click Next button.
    The driver installation starts.
17. Click Finish button when the installation completes.
18. Click Yes when prompted to restart the computer.

CLEAN INSTALL: (Add New Hardware Wizard)
If this is the first boot of Windows 98 after installing the Intel
MiniPCI Card in the computer, the Windows 98 detects the card
automatically.  To install the device driver, follow the instructions
below.

 1. Extract this package onto the hard disk drive.
 2. Start Windows 98.
 3. It displays Add New Hardware Wizard dialog box.
 4. Click Next button.
 5. Select Search for the best driver for your device. (recommended).
 6. Click Next button.
 7. Select Specify a location: only.
 8. Specify the directory name with the full path name where you
    extracted the package in the step 1 in Specify a location:.
 9. Click Next button.
10. Click Next button.
    The driver installation starts.
11. Click Finish button when the installation completes.
12. Click Yes when prompted to restart the computer.

CLEAN INSTALL: (PCI Ethernet Controller in Other devices)
Windows 98 detected the PCI Ethernet Controller, but was not able to
find the correct device driver. In this case, you will see Ethernet
Controller in Other devices in Device Manager. To install the
driver, follow the instructions below.

 1. Start Windows 98.
 2. If not yet, extract this package onto the hard disk drive.
 3. Click Start, select Settings, then click Control Panel.
 4. Double-click System icon.
 5. Click Device Manager tab.
 6. Right-click PCI Ethernet Controller in Other devices and click
    Properties.
 7. Click Driver tab.
 8. Click Update Driver button.
 9. Click Next button in Update Device Driver Wizard dialog box.
10. Select Search for a better driver than the one your device is
    using now.(recommended).
11. Click Next button.
12. Select Specify a location: only.
13. Specify the directory name with the full path name where you
    extracted the package in the step 2 in Specify a location:
14. Click Next button.
15. Click Next button.
    The driver installation starts.
16. Click Finish button when the installation completes.
17. Click Yes when prompted to restart the computer.


Determining which version is installed
--------------------------------------
 1. Start Windows 98.
 2. Click Start, point to Settings, then click Control Panel.
 3. Double-click the System icon.
 4. Click the Device Manager tab.
 5. Expand the Network adapters section.
 6. Double-click the Intel(R) PRO/100 VE Network Connection.
 7. Click the Driver tab.
 8. Click the Driver File details button.
 9. Highlight the file C:\WINDOWS\SYSTEM\E100BNT5.SYS.
    The file has the File version number embedded.


PROSetII Utility
NOTE: Please install Etherner driver first.

 1. Start Windows.
 2. Extract this package onto the hard disk drive.
 3. Click Start, then click Run.
 4. Type C:\DRIVERS\W98\ETHERNET\PROSet2\SETUP.EXE in the Open box and
    click the OK button.
 5. Follow the instructions on the screen.


Trademarks
----------
IBM and ThinkPad are trademarks of IBM Corporation.
Windows is a trademark of Microsoft Corporation.

Other company, product, and service names may be registered
trademarks, trademarks or service marks of others.