---------------------------------------------------------------------- Software Name BIOS (ISO format for bootable CD) Support models ThinkPad Z61e, Z61m, Z61p, Z61t Operating Systems Not applicable Version 2.14 Issue date January 15, 2007 ---------------------------------------------------------------------- WHAT THIS PACKAGE DOES This package is to update the BIOS (including system program and Embedded Controller program) stored in the ThinkPad computer to fix problems, add new functions, or expand functions as noted below. In order to enable the BIOS update by booting the computer from the CD-R/CD-RW disc, disregarding the operating system, this package is compiled into an ISO format which is compatible with CD-R/CD-RW writing software. For that purpose, it is necessary to have the CD-R/CD-RW writing software (with CD-R/CD-RW creation function from the ISO image) prepared separately. This program is language independent and can be used with any language system. ---------------------------------------------------------------------- CHANGES IN THIS RELEASE [Important Updates] Nothing. [New functions or enhancements] - Support for Microsoft Windows Vista. [Problem fixes] - DOS EMM386.EXE causes system hang or data corruption in USB memory when the DOS operating system boots from the USB memory. - While using battery power during DVD playback, Windows blue screen error may occur.(ATI video chip models) ---------------------------------------------------------------------- DETERMINING WHICH VERSION IS INSTALLED There are two ways for version check. (A) On Windows (B) On BIOS Setup Utility (A) Windows 1. To start the ThinkPad Configuration program, click Start, select All Programs (or Programs), select ThinkVantage, then click ThinkPad Configuration. 2. Click the System Information icon. 3. Click the BIOS information tab to display the BIOS version and Embedded Controller version. 4. Click OK to exit. (B) BIOS Setup Utility 1. Turn off the computer. 2. Turn on the computer. 3. While the "To interrupt normal startup, press the blue ThinkVantage button" message is displayed at the lower-left area of the screen, press the F1 key. The BIOS Setup Utility menu will be displayed. If a password prompt appears, type the correct password. 4. Check BIOS Version and Embedded Controller Version. 5. Turn off the computer. ---------------------------------------------------------------------- NOTES 1. In order to enable the BIOS update by booting the computer from the CD-R/CD-RW disc, it is necessary to prepare the CDR/CDRW writing software, such as RecordNow! writing software. If your version of RecordNow! does not have a "Burn Image" entry, upgrade RecordNow! from the following site. http://www.lenovo.com/pc/support/site.wss/document.do?lndocid=MIGR-43887 2. The CD-R/CD-RW disc for the BIOS update does not support any optical disc drives connected through USB devices, PC Cards, CardBus cards or installed into the Ultrabay of the Docking Station. It only supports internal CD-RW, CD-RW/DVD Combo and DVD Multi drives for ThinkPad. 3. To boot the computer from an internal optical disc drive, your ThinkPad computer may need to change the boot device setting. Refer to the "Prepare boot device" section in this document. ---------------------------------------------------------------------- CREATING THE BIOS CD The bootable CD-R/CD-RW created here is called a "BIOS CD." Creating a bootable CD-R/CD-RW disc 1. Make sure you have a ThinkPad with a CD-RW, CD-RW/DVD, combo or DVD multidrive installed. Prepare a blank CD-R or CD-RW disc. Prepare a blank CD-R/CD-RW disc. 2. Start RecordNow!. 3. Run RecordNow! from the Windows Start/Programs menu. 4. Click the Backup Projects tab. 4. Click the Burn Image project. 5. Locate the ISO file you downloaded to create your CD. 6. Follow the instructions on the screen. ---------------------------------------------------------------------- UPDATING THE BIOS Notes: - If your computer runs satisfactorily now, it may not be necessary to update the BIOS. To determine if you should update the BIOS, refer to the Version Information section. - You need an AC adapter, a charged battery pack and an either of internal CD-RW, CD-RW & DVD Combo or DVD Multi drive for ThinkPad to to update the BIOS. - If your computer is attached to any kind of docking station or port replicator, turn off the computer and detach it before proceeding. - Remove the Power-on password prior to updating the BIOS in the RDM (Remote Deployment Manager) or similar environment. Attention: Do not turn off, suspend the computer or remove the BIOS CD until the update has been completed. IF YOU DO THAT WHILE THE UPDATE IS STILL IN PROGRESS, THE SYSTEM BOARD MAY HAVE TO BE REPLACED. 1. Firmly connect the AC adapter to the computer. 2. Make sure you have a ThinkPad with a CD-RW, CD-RW/DVD, combo or DVD multidrive installed. 3. Insert the BIOS CD into the drive and turn on the computer. 4. Select Read this first from the menu and carefully read the information. 5. Press the Esc key to return to the menu. 6. Select Update system program and follow the instructions on the screen. 7. After the information panel appears, remove the BIOS CD in the drive then press the Enter key to restart the system. ---------------------------------------------------------------------- PREPARING THE BOOT DEVICE Confirm that an Optical Disc Drive is in the boot device list of your BIOS setup. 1. Power off the computer. 2. Power on the computer. 3. Press the F1 key to enter the BIOS Setup Utility when the "ThinkPad" logo is seen on the screen. The BIOS Setup Utility menu will be displayed. If a password prompt appears, type the correct password. 4. Choose "Startup" from the menu. 5. Choose "Boot" from the menu. Note the current boot priority order for restoration later if you need to modify your boot list. 6. In "Boot Priority Order", set "ATAPI CD0" to the top of the list, "1". 7. Press the F10 key to save the new setup, and then select Yes. 8. Power off or restart the computer. ---------------------------------------------------------------------- INITIALIZING BIOS BIOS Initialization is suggested for some problems. To initialize the BIOS settings: 1. Turn off the computer. 2. Turn on the computer. 3. While the "To interrupt normal startup, press the blue ThinkVantage button" message is displayed at the lower-left area of the screen, press the F1 key. The BIOS Setup Utility menu will be displayed. If a password prompt appears, type the correct password. 4. Press the F9 key to load default configuration. 5. Select Yes. 6. Press the F10 key to save default configuration and exit. 7. Select Yes. 8. Power off or restart the computer. Note: After initialization you may need to reapply some settings that you had changed previously. ---------------------------------------------------------------------- VERSION INFORMATION The following versions of BIOS and ECP (Embedded Controller Program) have been released to date. Package Version BIOS Version (BIOS ID) ECP Version (ECP ID) ------------------ ---------------------- -------------------- 2.14 2.14 (7FET96WW) 1.08 (7FHT26WW) 2.12 2.12 (7FET94WW) 1.08 (7FHT26WW) 2.11 2.11 (7FET93WW) 1.08 (7FHT26WW) None (For factory) 2.09 (7FET91WW) 1.08 (7FHT26WW) None (For factory) 2.06 (7FET88WW) 1.08 (7FHT26WW) None (For factory) 2.04 (7FET86WW) 1.08 (7FHT26WW) 1.13 1.13 (7FET53WW) 1.05 (7FHT23WW) 1.10 1.10 (7FET50WW) 1.04 (7FHT22WW) 1.08 1.08 (7FET48WW) 1.03 (7FHT21WW) 1.06 1.06 (7FET46WW) 1.01 (7FHT19WW) 1.05 1.05 (7FET45WW) 1.01 (7FHT19WW) To check the version of BIOS and Embedded Controller Program, refer to the Determining which version is installed section. Summary of Changes ------------------ Where: < > Package version BIOS: BIOS version ECP: Embedded Controller Program version [Important] Important Update (New) New Function or Enhancement (Fix) Correction to existing function <2.14> BIOS: 2.14 / ECP: 1.08 - (New) Support for Microsoft Windows Vista. - (Fix) DDOS EMM386.EXE causes system hang or data corruption in USB memory when the DOS operating system boots from the USB memory. - (Fix) While using battery power during DVD playback, Windows blue screen error may occur. (ATI video chip models) <2.12> BIOS: 2.12 / ECP: 1.08 - (Fix) If the computer is forcibly shut down by special conditions (such like, pressing the power button for a few seconds or battery down in suspend mode), the computer may not work after power on. <2.11> BIOS: 2.11 / ECP: 1.08 - (Fix) If a supervisor password is installed, input of the supervisor password may be required while BIOS update to version 2.04 or 2.06. <2.09> BIOS: 2.09 / ECP: 1.08 - (New) (Intel Graphics Media Accelerator 950 model only) Support for video memory size up to 224MB. (Note) Video memory size is always shown as 224MB, however, only required size by 3D software will be actually allocated up to 224MB. <2.06> BIOS: 2.06 / ECP: 1.08 - (Fix) In the BIOS version 2.04, the screen color in the VGA mode (shown in BIOS Setup menu, for example) may not be correct. - (Fix) After closing and then opening the LCD, location of icons on the Windows desktop may be changed. (Note) To resolve this problem, after updating the BIOS with this package, the following display driver must be installed, again. Video driver Intel 900/950/910GML/915GM/940GML/945GM Version 6.14.10.4693 or higher <2.04> BIOS: 2.04 / ECP: 1.08 - (New) Support for new ThinkPad Z61e/Z61m/Z61p/Z61t models in October/2006. - (New) Support for some wide screen modes. - (New) Enhancement of power management. - (Fix) If the computer is undocked from its docking station without correct Windows "Undock Computer" procedures, USB devices may not be recognized after hot-docking. - (Fix) Ethernet device appears in "Safely Remove Hardware" menu. <1.13> BIOS: 1.13 / ECP: 1.05 - (New) Upgraded to the latest microcode for Intel Core processor. - (New) Presentation Director can switch to the unknown external display which the computer fails to detect. - (Fix) (ThinkPad Z61p only) Unable to rotate the LCD screen in 1920x1200 resolution x 32 bit color mode. - (Fix) When the Password Reset Service option is set to Enabled and Using Passphrase option is set to Disabled, the Power-On Password or Hard Disk Password may not be unlocked with a registered password by the Password reset service. - (Fix) Hard drive reset may not be issued to the secondary hard drive in the docking station when communication reset is required. - (Fix) The computer fails to boot from a USB device when the wireless LAN switch is turned off. - (Fix) The computer may hang when entering standby mode, due to USB host controller settings. - (Fix) If the computer is undocked from its docking station without correct Windows "Undock Computer" procedures, USB devices may not be recognized after hot-docking. - (Fix) An Infrared device appears in the device manager on the computer without the Infrared communication feature. - (Fix) Stops checking the battery voltage for a while after starting battery charge. - --- (Only for ThinkPad Z61m with ATI Mobility-RADEON X1300/X1400 video chip) Support for a new type of video memory. <1.10> BIOS: 1.10 / ECP: 1.04 - (New) Support for ThinkPad Z61p. - (Fix) The computer may detect Bluetooth device not existing. - (Fix) The computer may hang very intermittently when ThinkVantage Active Protection System accesses its sensor. <1.08> BIOS: 1.08 / ECP: 1.03 - (New) Support for 1280x768 resolution panel. - (Fix) Improved frame drop during DVD playback in battery mode. - (Fix) Spontaneous wrong key may be input when you press keys on the external PS/2 type keyboard. - Numeric characters (2, 4, 6 and 8) may be inserted while the cursor keys are pressed. - Shift key operation is done without pressing the shift key. - Only upper case characters are typed. - Multiple selections with the cursor keys - Numeric keypad may work as the cursor keys. <1.06> BIOS: 1.06 / ECP: 1.01 - (Fix) The function to disable Infrared Device in BIOS Setup Utility does not work correctly (BIOS). <1.05> BIOS: 1.05 / ECP: 1.01 - (New) (Initial release) Support for ThinkPad Z61e, Z61m, Z61t. ---------------------------------------------------------------------- BIOS INFORMATION Memory Map Information ---------------------- Reserved Area: The following conventional memory addresses are reserved by the BIOS and others. [ATI Mobility Radeon X1300/X1400/FireGL V5200 models] C0000-CFFFF : Reserved for Video BIOS D0000-D1FFF : Reserved for Option ROM of Ethernet (*1) DC000-DFFFF : Reserved for USB BIOS (*2) E0000-FFFFF : Reserved for System BIOS [Intel Graphics Media Accelerator 950 model] C0000-CE7FF : Reserved for Video BIOS CE800-D07FF : Reserved for Option ROM of Ethernet (*1) DC000-DFFFF : Reserved for USB BIOS (*2) E0000-FFFFF : Reserved for System BIOS Notes: *1: This area becomes free by disabling the Internal Network Option ROM option under Config and Network in the BIOS Setup Utility. This choice will disable PXE and WOL features. *2: This area becomes free by disabling the USB BIOS Support option under Config and USB in the BIOS Setup Utility. This choice does not affect using USB devices in Windows operating systems. Usable Area: The following memory address can be used by the memory manager such as EMM386. [ATI Mobility Radeon X1300/X1400/FireGL V5200 models] D2000-DBFFF [Intel Graphics Media Accelerator 950 model] D0800-DBFFF Note: Certain addresses in this area will be reserved for CardBus Controllers or others by Operating Systems. The addresses vary and depend on the design of each Operating System. ---------------------------------------------------------------------- TRADEMARKS * ThinkPad is a registered trademark of Lenovo. * ThinkVantage and Ultrabay are trademarks of Lenovo. * IBM is a registered trademark of IBM Corporation. * ATI and Radeon are registered trademarks of ATI Technologies Inc. * FireGL and Mobility are trademarks of ATI Technologies Inc. * Intel is a registered trademark of Intel Corporation. * Microsoft and Windows are registered trademarks of Microsoft Corporation. * Windows Vista is a trademark of Microsoft Corporation. * RecordNow is a trademark of Sonic Solutions. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.