====================================================================== ThinkPad Integrated 56K Modem Software for Vista 32bit Version 7.54.00.00 ====================================================================== Notes: ------- This is beta software intended for use only in testing systems with Microsoft Vista operating systems. Beta software is not fully tested and may cause unpredictable operation or loss of data on the system in test. This package contains un-signed driver. For functional limitation or known problem, please refer to "Limitation of this package" section. Support Systems --------------- This package supports the following systems: - ThinkPad G41 - ThinkPad R50e, R51, R51e, R52 - ThinkPad T42, T42p - ThinkPad T43, T43p - ThinkPad X32 - ThinkPad X40, X41 - ThinkPad X41 Tablet (*3) Notes: *3: Supports Windows XP Tablet PC Edition 2005 Support Devices (Optional) --------------- This package supports the following devices: - ThinkPad Integrated 56K Modem Support Operating Systems ------------------------- - Windows Vista 32bit - Windows XP - Windows 2000 Installation instructions ------------------------- Clean installation: ** Note: While installing the modem driver, NetWaiting (Modem on Hold Application) and Digital Line Detect (an applet for the over-current protection) will be also installed at the same time. Follow the instruction displayed to install those utilities. Windows 2000 1. Make a temporary directory and unzip the file into there. 2. Boot the system. 3. When the system asks the location of the driver for "PCI Device", click the "Cancel" button. 4. Run 'HXFSetup.EXE' in the root directory of the package extracted. 5. 'Device driver Installation wizard' will open. Click 'OK' button. 6. Modem device driver will be installed. 6-1 When DS warning pop-up opens, click 'Yes' button. 6-2 When DS warning pop-up opens again, click 'Yes' button. 7. NetWating setup program starts. 7-1 On the Welcome window, just click 'Next' button. 7-2 On the 'Licence Agreement' window, just click 'Yes' button. 7-3 On the 'Choose Destination Location' window, just click 'Next' button. 7-4 On the 'Select Program Folder' window, just click 'Next' button. 7-5 When finished installing NetWaiting, click 'Finish' button. 8. Digital Line Detect setup program starts. 8-1 On the Welcome window, just click 'Next' button. 8-2 On the 'Licence Agreement' window, just click 'Yes' button. 8-3 On the 'Choose Destination Location' window, just click 'Next' button. 8-4 On the 'Select Program Folder' window, just click 'Next' button. 8-5 When finished installing NetWaiting, click 'Finish' button. 9. On Device driver installation wizard window, check the insatllation result is 'SUCCESS', and click 'OK' button to complete installation. 10. Restart the system if needed. Windows XP 1. Make a temporary directory and unzip the file into there. 2. Boot the system. 3. When the system asks the location of the driver for "PCI Card", click the "Cancel" button. 4. Run 'HXFSetup.EXE' in the root directory of the package extracted. 5. 'Device driver Installation wizard' will open. Click 'OK' button. 6. Modem device driver will be installed. 6-1 When DS warning pop-up opens, click 'Continue Anyway' button. 6-2 When 'Found New Hardware Wizard' pop-up opens, click 'Next' button. 6-3 When DS warning pop-up opens, click 'Continue Anyway' button. 6-4 Click 'Finish' button when finished. 7. NetWating setup program starts. 7-1 On the Welcome window, just click 'Next' button. 7-2 On the 'Licence Agreement' window, just click 'Yes' button. 7-3 On the 'Choose Destination Location' window, just click 'Next' button. 7-4 On the 'Select Program Folder' window, just click 'Next' button. 7-5 When finished installing NetWaiting, click 'Finish' button. 8. Digital Line Detect setup program starts. 8-1 On the Welcome window, just click 'Next' button. 8-2 On the 'Licence Agreement' window, just click 'Yes' button. 8-3 On the 'Choose Destination Location' window, just click 'Next' button. 8-4 On the 'Select Program Folder' window, just click 'Next' button. 8-5 When finished installing NetWaiting, click 'Finish' button. 9. On Device driver installation wizard window, check the insatllation result is 'SUCCESS', and click 'OK' button to complete installation. 10. Restart the system if needed. Windows Vista 1. Make a temporary directory and unzip the file into there. 2. Boot the system. 3. Run 'Setup.EXE' in the root directory of the package extracted. 4. 'Device driver Installation wizard' will open. Click 'OK' button. 5. Modem device driver will be installed. 5-1 If "Windows Security" pop-up opens that says 'The publisher could not be verified. Are you sure you want to install this device software?', click 'Install' button to install it. 6. NetWating setup program starts. 6-1 If a pop-up window opens that askes you to select language, select language you want and click OK button. 6-2 On the Welcome window, just click 'Next' button. 6-3 On the 'Licence Agreement' window, just click 'Yes' button. 6-4 On the 'Select Program Folder' window, just click 'Next' button. 6-5 When finished installing NetWaiting, click 'Finish' button. 7. Digital Line Detect setup program starts. 7-1 On the Welcome window, just click 'Next' button. 7-2 On the 'Licence Agreement' window, just click 'Yes' button. 7-3 On the 'Select Program Folder' window, just click 'Next' button. 7-4 When finished installing NetWaiting, click 'Finish' button. 8. On Device driver installation wizard window, check the insatllation result is 'SUCCESS', and click 'OK' button to complete installation. 9. Restart the system if needed. * During installation, sometimes following dialogs appear because of Windows Security of Vista. Please choose Install and then proceed Installation. - Message 1 - Windows Security - Would you like to install this device software? You should only install drivers software from publishers you trust. - Message 2 - Windows Security - Windows can't verify the publisher of this driver software ** During installation, sometimes following dialogs appear because of User Account Control of Vista. Please click Continue or Allow and then proceed installation. - Message 1 - A program needs your permission to continue If you started this program, continue. - Message 2 - An unidentified program wants access to your computer Don't run the program unless you know where it's from or you've used it before. Unattended installation: This is for system administrators use only. On Windows XP/2000 1. Start Windows and logon with administrative privileges. 2. Extract this package onto the hard disk drive. 3. Click Start. 4. Click Run. 5 Type "HSFSETUP.EXE -s" with the full path name where you extracted the package in the step 3, and click OK. The default location is C:\Drivers\WIN\HDAMODEM On Windows XP 1. Start Windows Vista and logon with administrative privileges. 2. Extract this package onto the hard disk drive. 3. Click Start button, then click All Programs. 4. Click Accessories, then click Command Prompt. 5 Type "SETUP.EXE -s" with the full path name where you extracted the package in the step 3, and click OK. The default location is C:\Drivers\WIN\HDAMODEM Uninstalling the driver: ** Note: While uninstalling the modem driver, NetWaiting (Modem on Hold Application) and Digital Line Detect (an applet for the over-current protection) will be also installed at the same time. Follow the instruction displayed to uninstall those utilities. Windows 2000 1. Start Windows. 2. Click on 'Start' -> 'Settings' -> 'Control panel'. 3. Double click 'Add/Remove Programs. 4. Select 'ThinkPad Integrated 56K Modem', then click 'Change/Remove'. 5. Device driver Uninstallation wizard will open. Click 'OK' button. 6. Modem device driver will be uninstalled. 7. NetWating uninstallation program starts. 7-1 On the Welcome window, select 'Remove' and click 'Next' button. 7-2 On the 'Confirm Uninstall' pop-up, click 'OK' button. 7-3 NetWating will be uninstlled. 8. Digital Line Detect uninstallation program starts. 7-1 On the Welcome window, select 'Remove' and click 'Next' button. 7-2 On the 'Confirm Uninstall' pop-up, click 'OK' button. 7-3 NetWating will be uninstlled. 9. On Device driver uninstallation wizard window, check the uninsatllation result is 'SUCCESS' and click 'OK' button to finish uninstallation. 10. Restart the system if needed. Windows XP 1. Start Windows. 2. Click on 'Start' -> 'Control panel'. 3. Click 'Add or Remove Programs. 4. Select 'ThinkPad Integrated 56K Modem', then click 'Change/Remove'. 5. Device driver Uninstallation wizard will open. Click 'OK' button. 6. Modem device driver will be uninstalled. 7. NetWating uninstallation program starts. 7-1 On the Welcome window, select 'Remove' and click 'Next' button. 7-2 On the 'Confirm Uninstall' pop-up, click 'OK' button. 7-3 NetWating will be uninstlled. 8. Digital Line Detect uninstallation program starts. 7-1 On the Welcome window, select 'Remove' and click 'Next' button. 7-2 On the 'Confirm Uninstall' pop-up, click 'OK' button. 7-3 NetWating will be uninstlled. 9. On Device driver uninstallation wizard window, check the uninsatllation result is 'SUCCESS' and click 'OK' button to finish uninstallation. Windows Vista 1. Start Windows. 2. Click on 'Start' -> 'Control panel'. 3. Click 'Programs'. 4. Click 'Programs and Features / Uninstall a program'. 5. Select 'ThinkPad Integrated 56K Modem' and click 'Uninstall/Change'. 6. Modem device driver will be uninstalled. 7. NetWating uninstallation program starts. 7-1 On the 'Confirm Uninstall' pop-up, click 'OK' button. 7-2 NetWating will be uninstlled. 8. Digital Line Detect uninstallation program starts. 7-1 On the Welcome window, select 'Remove' and click 'Next' button. 7-2 On the 'Confirm Uninstall' pop-up, click 'OK' button. 7-3 NetWating will be uninstlled. Determining which version is installed -------------------------------------- 1. Start Windows Vista. 2. Click Start and then click Control Panel. 3. Click Device Manager. 4. Click Continue for Windows needs your permission to continue 5. Expand Modems section. 6. Select ThinkPad Integrated 56K Modem 7. Right-click ThinkPad Integrated 56K Modem, and select Properties. 8. Click the Driver tab. 9. Driver Version is displayed. Limitation of this package -------------------------- Please describe a functional limitation and important known issue if any. Trademarks ---------- * ThinkPad is a registered trademark of Lenovo. * Microsoft and Windows are registered trademarks of Microsoft Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.