---------------------------------------------------------------------- Software Name BIOS (System Program Service Diskette) Support models ThinkPad R51 (Machine Types 2883, 2887, 2888, 2889, 2894, 2895) Operating Systems Not applicable Version 1.28 Issue date August 30, 2006 ---------------------------------------------------------------------- WHAT THIS PACKAGE DOES This System Program Service Diskette updates the BIOS (system program) stored in the ThinkPad computer to fix problems, add new functions, or expand functions as noted below. This program is language independent and can be used with any language system. ---------------------------------------------------------------------- CHANGES IN THIS RELEASE [Important Updates] Nothing. [New functions or enhancements] - Added new options to hide the following internal communication devices from Operating System in the BIOS Setup menu. Infrared: Config -> Infrared -> Infrared Device [Problem fixes] Nothing. ---------------------------------------------------------------------- DETERMINING WHICH VERSION IS INSTALLED There are two ways for version check. (A) On Windows (B) On BIOS Setup Utility (A) On Windows 1. Start the ThinkPad Configuration program. Click Start, select All Programs (or Programs), select ThinkVantage, and then click ThinkPad Configuration. 2. Click the System Information icon. 3. Click the BIOS information tab. BIOS version and Embedded Controller version will be displayed. 4. Click OK to exit. (B) On BIOS Setup Utility 1. Turn off the computer. 2. Turn on the computer. 3. While the "To interrupt normal startup, press the blue Access IBM button" message is displayed at the lower-left area of the screen, press the F1 key. The BIOS Setup Utility menu will be displayed. If a password prompt appears, type the correct password. 4. Check BIOS Version and Embedded Controller Version. 5. Turn off the computer. ---------------------------------------------------------------------- NOTES - This package is for Machine Type 2883, 2887, 2888, 2889, 2894 and 2895 of ThinkPad R51. For the other machine types of ThinkPad R51, please get the package for them. - This BIOS version will only work with Embedded Controller Program Version 1.03 or higher. Obtain the additional package, Embedded Controller Program Version 1.03 or higher, and update the Embedded Controller Program in the system with it. - If you need to update Embedded Controller Program as well as the BIOS, update BIOS first. ---------------------------------------------------------------------- UPDATE INSTRUCTIONS Notes: - If your computer runs satisfactorily now, it may not be necessary to update the BIOS. To determine if you should update the BIOS, refer to the Version Information section. - You need an AC adapter and a charged battery pack to update the system program (BIOS). - If your computer is attached to any kind of docking station or port replicator, turn off the computer and detach it before proceeding. - Make sure the System Program Service Diskette is write-protected. - Remove the Power-on password prior to updating the system program (BIOS) in RDM (Remote Deployment Manager) environment or similar environment. 1. Firmly connect the AC adapter to the computer. 2. Insert the write protected System Program Service Diskette into the diskette drive and turn on the computer. 3. Select Read this first from the menu and carefully read the information that appears. 4. Press the Esc key to return to the menu. 5. Select Update system program and follow the instructions on the screen. Note: If you are updating the system program through the USB external diskette drive, it will take quite a long time to complete reading the system program file, but it is normal. Continue the update. Attention: Do not turn off, suspend the computer or remove the diskette until the update has been completed. IF YOU TURN OFF OR SUSPEND THE COMPUTER WHILE THE UPDATE IS STILL IN PROGRESS, THE SYSTEM BOARD MAY HAVE TO BE REPLACED. After the update has been completed, the system is automatically turned off. ---------------------------------------------------------------------- INITIALIZING BIOS BIOS Initialization is suggested for some problems. To initialize the BIOS settings: 1. Turn off the computer. 2. Turn on the computer. 3. While the "To interrupt normal startup, press the blue Access IBM button" message is displayed at the lower-left area of the screen, press the F1 key. The BIOS Setup Utility menu will be displayed. If a password prompt appears, type the correct password. 4. Press the F9 key to load default configuration. 5. Select Yes. 6. Press the F10 key to save default configuration and exit. 7. Select Yes. After the initialization has been completed, the system restarts automatically. ---------------------------------------------------------------------- VERSION INFORMATION The following versions of BIOS have been released to date. Moreover, the Embedded Controller Program is prepared according to them. BIOS Version BIOS Internal ID Embedded Controller Program Version ------------ ---------------- ----------------------------------- 1.28 1VET70WW 1.03 or higher 1.27 1VET69WW 1.03 or higher 1.25 1VET67WW 1.03 or higher 1.24 1VET66WW 1.03 or higher 1.23 1VET65WW 1.03 or higher 1.22 1VET64WW 1.03 or higher 1.21 1VET63WW 1.03 or higher 1.20 1VET62WW 1.03 or higher 1.19 1VET61WW 1.03 or higher 1.17 1VET59WW 1.03 or higher 1.16 1VET58WW 1.01 or 1.02 1.11 1VET53WW 1.01 or 1.02 1.03 1VET45WW 1.01 or 1.02 1.01 1VET39WW 1.00 To check the version of BIOS and Embedded Controller Program, refer to the Determining which version is installed section. Summary of Changes ------------------ Where: < > BIOS version ( ) BIOS internal ID which is for administrator purpose (Important) Important Update (New) New Function or Enhancement (Fix) Correction to existing function <1.28> (1VET70WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.03 or higher. - (New) Added new options to hide the following internal communication devices from Operating System in the BIOS Setup menu. Infrared: Config -> Infrared -> Infrared Device <1.27> (1VET69WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.03 or higher. - (Fix) Intel Pentium M Processor and Centrino logos displayed on screen after power-on is modified. - (Fix) The computer may hang if the hard disk drive is damaged. <1.25> (1VET67WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.03 or higher. - (Fix) A CardBus Controller setting was wrong. - (Fix) The computer may hang up when a boot device is changed in Startup menu of BIOS Setup Utility. <1.24> (1VET66WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.03 or higher. - (Fix) With the BIOS version 1.23 (1VET65WW), the system will shut down on Wake On Lan with an Ultrabay Slim Second HDD adapter, even if no password is set in the second HDD. - (Fix) Powering off at a password prompt with a newly attached USB storage device, an error appears on power-on. - (Fix) The system may not start with some USB devices, attached to docking station or port replicator. <1.23> (1VET65WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.03 or higher. - (New) Enhancement of security function on power-on: When hard disk password is set, regardless of other passwords settings, Wake On Lan from power off state does not work. - (Fix) Corrections based on Intel 852GME HPLLCC errata. <1.22> (1VET64WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.03 or higher. - (New) MPU microcode update. - (Fix) Some BIOS Setup menu items are not copied with using a Remote CMOS Update Utility. <1.21> (1VET63WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.03 or higher. - (New) MPU microcode update. - (Fix) Input process of the supervisor password is improved. <1.20> (1VET62WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.03 or higher. - (Fix) The clock frequency (speed) of CPU is not set to the highest speed in battery mode even if "Intel(R) SpeedStep technology" option of "Power" of "Config" in the "IBM BIOS Setup Utility" menu is set to Enabled and its "Mode for Battery" option is set to "Maximum Performance". <1.19> (1VET61WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.03 or higher. - (Fix) An E228 error may be displayed after the computer is powered on. <1.17> (1VET59WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.03 or higher. - (New) Internal Network device enable/disable function is added in IBM BIOS Setup Utility. - (New) Internal Wireless device enable/disable function is added in IBM BIOS Setup Utility. - (New) Intel Centrino Logo is updated. - (New) Support for Bluetooth models of ThinkPad R51 (M/T 2883, 2887, 2888, 2889, 2894 and 2895). - (Fix) The memory data will be corrupted if timer resume is aborted when "Timer Wake with Battery Operation" option in IBM BIOS Setup Utility is disabled. - (Fix) The system hangs when booted from the 2nd FDD in boot order. - (Fix) Old version of IBM 11a/b/g Wireless LAN Mini PCI Adapter software (Version 2.4.1.7 or elders) may not work. <1.16> (1VET58WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or 1.02. - (Fix) The computer may be immediately powered off at the password prompt screen after returning from hibernation if the Power- on Password is set and the "Require password after hibernate" option in the IBM BIOS Setup Utility is set to Enabled. - (Fix) The correct passphrase is not accepted at the passphrase prompt screen of the UVM (User Verification Manager) function of the IBM Client Security Software after returning from standby mode if all of the following conditions are met: 1. "Timer Wake with Battery Operation" option in the IBM BIOS Setup Utility is set to disabled. 2. In the Windows XP Power Options properties, both "System standby" and "System hibernates" for "Running on batteries" are set. The timer setting of "System hibernates" is longer than that of "System standby". 3. The computer is running on the battery. 4. The computer goes into standby mode by following the timer setting of the "System Standby" option, and then is in idling state longer than the time which is set in the "System hibernates" option. 5. Let the computer resume normal operation from standby mode. - --- Support for a new revision of power management chip on the system board. <1.11> (1VET53WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or 1.02. - (New) Support for a new option, "Require password after hibernate" in the IBM BIOS Setup Utility. This is to enable/disable for the computer to prompt for the Power-on password when the system starts from hibernate. Go to the Require password after hibernate option under Security and Password in the IBM BIOS Setup Utility, and refer to Item Specific Help for details. - (New) Support for a new option, "Timer Wake with Battery Operation" in the IBM BIOS Setup Utility. This is to enable/disable scheduled wake up events if the computer is not connected to the AC adapter. Go to the Timer Wake with Battery Operation option under Config and Power in the IBM BIOS Setup Utility, and refer to Item Specific Help for details. <1.03> (1VET45WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.01 or 1.02. - (New) Support for the Intel Pentium M Processor 715, 725 and 735 - (Fix) USB mass storage set by Startup menu in IBM BIOS Setup may not be booted on some Operating Systems other than Windows and DOS. - (Fix) Bootable CD may boot slowly. - (Fix) Setting of an IDE device in a docking station may be wrong. <1.01> (1VET39WW) Note: This BIOS version will only work with Embedded Controller Program Version 1.00. - (New) (Initial release) Support for ThinkPad R51 (M/T 2883, 2887, 2888, 2889, 2894 and 2895). ---------------------------------------------------------------------- BIOS INFORMATION Memory Map Information ---------------------- Reserved Area: The following conventional memory addresses are reserved by the BIOS (system program) and others. C0000-CCFFF : Reserved for Video BIOS CD000-CEFFF : Reserved for Option ROM of Ethernet DC000-DFFFF : Reserved for USB BIOS (*1) E0000-FFFFF : Reserved for System BIOS Note: *1: This area becomes free by disabling the USB BIOS Support option under Config and USB in the BIOS Setup Utility. This choice does not affect using USB devices in Windows operating systems. Usable Area: The following memory address can be used by the memory manager such as EMM386. CF000-DBFFF Note: Certain addresses in this area will be reserved for CardBus Controllers or others by Operating Systems. The addresses vary and depend on the design of each Operating System. ---------------------------------------------------------------------- TRADEMARKS * ThinkPad is a registered trademark of Lenovo. * ThinkVantage is a trademark of Lenovo. * IBM is a registered trademark of IBM Corporation. * Intel, Pentium and SpeedStep are registered trademarks of Intel Corporation. * Centrino is a trademark of Intel Corporation. * Microsoft and Windows are registered trademarks of Microsoft Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.