IBM ARTIC X.25 Coprocessor Support for NetWare WAN HSM Version 3.10.03 TABLE OF CONTENTS ----------------- 1. Product Specifications - Overview - ARTIC Adapters Supported - Product Supported - Protocols Supported - Software Requirements - Latest Software Updates - Related Publications 2. Download the Package File to the Target System 3. Components of the Downloaded File 4. Product Installation and Configuration 5. Version History 6. Release Notes 7. Support Information 8. Notices 9. Trademark List 1. Product Specifications Overview -------- This IBM software offering supports the ARTIC X.25 Co-Processor. This card is equipped with an Intel 80C186 microprocessor and 512 KB of memory, providing a cable-selected single serial I/O port. Additionally this card provides a powerful and flexible communications interface for ISA, MicroChannel, or PCI bus based applications requiring a high-speed synchronous connection. ARTIC Adapters Supported ------------------------ - ARTIC X.25 ISA (71G6460) (Certified by Novell) - ARTIC X.25 PCI (55H4501) (Certified by Novell) Products Supported ------------------ - NetWare 5.1 - NetWare 4.2 - NetWare 4.11 (a component of IntranetWare) - NovellBorderManager (v2.1.0) - intraNetWare for SAA (v3.0) - NetWare 4.10 - NetWare V3.12 - WAN-Extensions V3.0 - WAN-Extensions V3.1 - NetWare MultiProtocol Router (MPR) V3.0 - NetWare MultiProtocol Router (MPR) V3.1 - NetWare Connect V2.0 - NetWare for SAA V2.0 - NetWare for SAA V2.2 Protocols Supported ------------------- - X.25 (NetWare WAN Extensions, NetWare Connect, NetWare for SAA) - Frame Relay (NetWare Multiprotocol Router) - PPP (NetWare Multiprotocol Router) - SDLC (NetWare for SAA) Latest Software Updates ------------------------ - The latest software updates can be downloaded from the Web at: http://www.pc.ibm.com/us/support/options/artic.html Related Publications -------------------- - Publications can be obtained from the Web at: http://www.pc.ibm.com/us/support/options/artic.html 2.Download the Package File to the Target System How to download "IBM ARTIC X.25 Co-Processor Support for NetWare WAN HSM" to the target system. a. Download the self-extracting file NHM310N.exe as a binary file to the working directory. b. Uncompress the package file by typing: NHM310N x (where x is the temporary directory) 3. Components of the Downloaded File license.add - License Agreement license.pla - Program License Agreement readme.1st - General information for the license files NHM310N.TXT - Product information and installation instructions DNHM3103.EXE - Self-extracting disk image 4. Product Installation and Configuration Create Product Disk ------------------- Create the IBM ARTIC X.25 Coprocessor Support for NetWare WAN HSM Diskette by issuing the following command. Note that 'A:' is the location of the diskette drive. DNHM3103 A: Installation ------------ IBM ARTIC X.25 Coprocessor Support for NetWare WAN HSM uses PINSTALL for installation. From the System Console, use the LOAD command to run PINSTALL from the diskette. LOAD A:PINSTALL Configuration ------------- All the changes from Version 3.00 to 3.10 were made to simplify configuration. A new INETCFG snapin now automatically finds any installed/supported ARTIC adapters and determines the proper configuration parameters. Configuration is performed by selecting the proper ARTIC adapter from the Board option menu. The ARTIC X.25 PCI adapters are listed by PCI device number order. Below is an example of the load command, created by INETCFG, for two cards. load artic1x name=artic_1 channel=1 int=a port=2a0 mem=d0000 load artic1x name=artic_2 channel=1 int=b port=6a0 mem=d2000 The X.25 Interface Co-Processor Guide to Operations gives information on configuring the adapter. The chapter on 'Special Configuration Information' details how to build an ICAPARM.PRM file and modify the CONFIG.SYS file. These changes are not needed and should not be done. Notes ----- Always reconfigure the ARTIC X.25 PCI Adapter whenever any hardware configuration changes are made. Run INETCFG, select the ARTIC X.25 PCI Adapter, then re-select the proper adapter. This will update the Port, Interrupt, and Memory parameters that are used when the system is booted. Finally bring down and restart the server. As the driver loads, the message 'Unneeded channel number ignored' is displayed. This warning is normal and cannot be avoided. As the driver loads, the message 'Unneeded I/O Port number ignored' is displayed. This warning is normal and cannot be avoided. 5. Version History 3.10 ---- - Fix for V.35 support - Added INETCFG Snapin (now configures ISA, Micro Channel, and PCI adapters) 3.10.01 ------- - Support for Netware v5.0 3.10.02 ------- - Fixed Netware v5.0 real mode interrupt problem - Fixed X.21 cable support 3.10.03 ------- - Added support for PCI memory window management above 1MB 6. Release Notes Not Applicable 7. Support Information IBM ARTIC Technical Support Desk (USA and Canada): call 1-800-237-5511 and at the Voice Response Unit enter "0" (ignore all other options). IBM ARTIC Technical Support Desk for all other locations, call your IBM country specialists. 8. Notices This information was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service. IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to: IBM Director of Licensing IBM Corporation North Castle Drive Armonk, NY 10504-1785 U.S.A. 9. Trademark List The following terms are trademarks of the IBM Corporation in the United States or other countries, or both: IBM Micro Channel PS/2 Personal System/2 OS/2 Operating System/2 AIX RISC System/6000 C Set ++ Macro Assembler/2 Portmaster Proprinter IBM VisualAge C++ Other company, product, and service names may be trademarks or service marks of others. C-bus is a trademark of Corollary, Inc. in the United States, other countries, or both. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States, other countries, or both. Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both. PC Direct is a trademark of Ziff Communications Company in the United States, other countries, or both and is used by IBM Corporation under license. ActionMedia, LANDesk, MMX, Pentium, and ProShare are trademarks of Intel Corporation in the United States, other countries, or both. (For a complete list of Intel trademarks, see www.intel.com/tradmarx.htm) UNIX is a registered trademark in the United States, other countries, or both and is licensed exclusively through X/Open Company Limited. SET and the SET Logo are trademarks owned by SET Secure Electronic Transaction LLC. (For further information, see www.setco.org/aboutmark.html)