Patch Name:  PHNE_9034

Patch Description: s700 10.10 ARPA Transport patch

Creation Date: 96/10/25

Post Date:  96/10/29

Hardware Platforms - OS Releases:
        s700: 10.10

Products: N/A

Filesets:
        Networking.NET-KRN

Automatic Reboot?: Yes

Status: General Superseded

Critical:
        Yes
        PHNE_9034: PANIC

Path Name:  /hp-ux_patches/s700/10.X/PHNE_9034

Symptoms:
        PHNE_9034:
                See Defect Description

Defect Description:
        PHNE_9034:
                ( SR number:  5003342071 )
        ping can cause panic.

SR:
        5003342071

Patch Files:
        /usr/conf/lib/libinet.a(ip_input.o)

what(1) Output:
        /usr/conf/lib/libinet.a(ip_input.o):
                PHNE_9034 ip_input.c $Revision: 1.6.102.11 $ $Date:
                        96/10/24 17:13:14 $

cksum(1) Output:
        2924332116 17580 /usr/conf/lib/libinet.a(ip_input.o)

Patch Conflicts: None

Patch Dependencies:
        s700: 10.10: PHNE_8063

Hardware Dependencies:  None

Other Dependencies:  None

Supersedes:  None

Equivalent Patches: None

Patch Package Size:  70 Kbytes

Installation Instructions:
        Please review all instructions and the Hewlett-Packard
        SupportLine User Guide or your Hewlett-Packard support terms
        and conditions for precautions, scope of license,
        restrictions, and, limitation of liability and warranties,
        before installing this patch.
        ------------------------------------------------------------
        1. Back up your system before installing a patch.

        2. Login as root.

        3. Copy the patch to the /tmp directory.

        4. Move to the /tmp directory and unshar the patch:

                cd /tmp
                sh PHNE_9034

        5a. For a standalone system, run swinstall to install the
            patch:

                swinstall -x autoreboot=true -x match_target=true \
                        -s /tmp/PHNE_9034.depot

        5b. For a homogeneous NFS Diskless cluster run swcluster on the
            server to install the patch on the server and the clients:

                swcluster -i -b

            This will invoke swcluster in the interactive mode and
            force all clients to be shut down.

            WARNING: All cluster clients must be shut down prior to the
                     patch installation.  Installing the patch while the
                     clients are booted is unsupported and can lead to
                     serious problems.

            The swcluster command will invoke an swinstall session in which
            you must specify:

                alternate root path  -  default is /export/shared_root/OS_700
                source depot path    -  /tmp/PHNE_9034.depot

            To complete the installation, select the patch by choosing
            "Actions -> Match What Target Has" and then "Actions -> Install"
            from the Menubar.

        5c. For a heterogeneous NFS Diskless cluster:

                - run swinstall on the server as in step 5a to install
                  the patch on the cluster server.

                - run swcluster on the server as in step 5b to install
                  the patch on the cluster clients.

        By default swinstall will archive the original software in
        /var/adm/sw/patch/PHNE_9034.  If you do not wish to retain a
        copy of the original software, you can create an empty file
        named /var/adm/sw/patch/PATCH_NOSAVE.

        Warning: If this file exists when a patch is installed, the
                 patch cannot be deinstalled.  Please be careful
                 when using this feature.

        It is recommended that you move the PHNE_9034.text file to
        /var/adm/sw/patch for future reference.

        To put this patch on a magnetic tape and install from the
        tape drive, use the command:

                dd if=/tmp/PHNE_9034.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
        Due to the critical nature of this defect, HP is introducing
        this as a non-cumulative patch.  As a result the current
        ARPA Transport cumulative patch, PHNE_8063 must be
        installed before PHNE_9034.  The two can be installed in the
        same session and swinstall will insure that PHNE_89063 is
        loaded first.  The installation of PHNE_9034 will fail if
        PHNE_8063 is not installed.