Patch Name: PHKL_28858

Patch Description: s700 10.26  WSIO SCSI cumulative patch

Creation Date: 03/03/26

Post Date: 03/03/28

Hardware Platforms - OS Releases:
	s700: 10.26

Products: N/A

Filesets:
	OS-Core.CORE-KRN

Automatic Reboot?: Yes

Status: General Release

Critical:
	No (superseded patches were critical)
	PHKL_19084: HANG PANIC

Path Name: /hp-ux_patches/s700/10.X/PHKL_28858

Symptoms:
	PHKL_28858:
	1. 'ioscan -f' command output shows "state" field as
	   "UNCLAIMED" for scanners SJ6100 and SJ6250C.

	PHKL_25923:
	c720 driver does not support SYM 53C895A SCSI chip

	PHKL_19084:
	Ported 10.20 patch PHKL_18390 to TOS.
	(PHKL_18390)
	SR:1653300004 DTS: JAGaa47696 (dup of JAGaa11155)
	Slow PVlink failover
	Diskinfo reports back on an unavailable disk.
	SR:1653300970 DTS:JAGab11365
	SR:1653290395 DTS: JAGaa47016
	A faulty disk can prevent the LVM mirroring from working.
	(PHKL_17467)
	I/O failover hang on Fiber Channel PV_link.
	(PHKL_16861)
	I/O failover hang on Fiber Channel PV_link.
	(PHKL_17639)
	This patch enables new functionality which adds new I/O
	drivers to support the B1000, C3000, and J5000 systems.
	(PHKL_16926)
	SR:5003434118 DTS:JAGaa23967
	System panics (Data Page Fault) in scsi_destroy_scb
	SR:5003429654 DTS:JAGaa40369
	System panics in c720_invalid_req_done
	SR:4701407890 DTS:JAGaa23080
	Unexpected Disconnect Messages when using pass through
	driver

Defect Description:
	PHKL_28858:
	1. Scanners connected on the SCSI bus shows up as
	   'processor' device type. Since 'processor' device
	   type does not exist in the 'sctl' driver list,
	   scanners are not being claimed.

	Resolution:
	1. Code has been modified to claim the scanners SJ6100
	   and SJ6250C.

	PHKL_25923:
	PCI ID for the 53C895A chip is not in the list of
	supported PCI IDs. Therefore c720 driver does not
	claim this chip.
	Resolution:
	Added 53C895A chip to the list of supported devices.

	PHKL_19084:
	SR:1653300004 DTS: JAGaa47696 (dup of JAGaa11155)
	Slow PVlink failover or diskinfo reporting good disk status
	on an unavailable disk is due to the SCSI INQUIRY command
	returning cached data instead of sending the command down to
	the device."
	Resolution:
	We now ensure an INQUIRY command will be sent down to the
	device when the disk becomes nonresponsive.
	SR:1653300970 DTS:JAGab11365 and
	SR:1653290395 DTS:JAGaa47016
	If a faulty disk sends NOT_READY sense key to SCSI.  The
	current SCSI policy is to retry the request until the disk
	is ready.  This results in a hang IO situation and prevents
	the LVM mirroring from working.
	Resolution:
	LVM-related NOT_READY requests will be treated as
	nonresponse from the disk and will therefore be failed back
	for LVM to handle.

SR:
	8606107849 1653300970 4701398263 4701407668 4701407890
	4701414136 5003429654 5003434118

Patch Files:
	/usr/conf/lib/libhp-ux.a(scsi_c720.o)
	/usr/conf/lib/libhp-ux.a(scsi_ctl.o)
	/usr/conf/lib/libhp-ux.a(scsi_disk.o)

what(1) Output:
	/usr/conf/lib/libhp-ux.a(scsi_c720.o):
		01/12/13 kern/wsio/scsi_c720.c, hpux, hpux_10.26, ic
			5gh Revision 1.6 PATCH_10.26 (PHKL_25923) UN
			MODIFIED
		scsi_c720.c $Date: 2001/01/31 18:18:55 $ $Revision:
			1.5.98.53 $
	/usr/conf/lib/libhp-ux.a(scsi_ctl.o):
		03/03/14 kern/wsio/scsi_ctl.c, hpux, hpux_10.26, ic5
			ho Revision 1.8 PATCH_10.26 (PHKL_28858)
	/usr/conf/lib/libhp-ux.a(scsi_disk.o):
		99/07/27 kern/wsio/scsi_disk.c, hpux, hpux_10.26, ic
			5dc Revision 1.8 PATCH_10.26 (PHKL_19084)

cksum(1) Output:
	323153245 108936 /usr/conf/lib/libhp-ux.a(scsi_c720.o)
	1060096189 72780 /usr/conf/lib/libhp-ux.a(scsi_ctl.o)
	1347041075 22536 /usr/conf/lib/libhp-ux.a(scsi_disk.o)

Patch Conflicts: None

Patch Dependencies:
	s700: 10.26: PHKL_17282

Hardware Dependencies: None

Other Dependencies: None

Supersedes:
	PHKL_19084 PHKL_25923

Equivalent Patches:
	PHKL_28859:
	s800: 10.26

Patch Package Size: 260 KBytes

Installation Instructions:
	Please review all instructions and the Hewlett-Packard
	SupportLine User Guide or your Hewlett-Packard support terms
	and conditions for precautions, scope of license,
	restrictions, and, limitation of liability and warranties,
	before installing this patch.
	------------------------------------------------------------
	1. Back up your system before installing a patch.

	2. Login as root.

	3. Copy the patch to the /tmp directory.

	4. Move to the /tmp directory and unshar the patch:

		cd /tmp
		sh PHKL_28858

	5a. For a standalone system, run swinstall to install the
	    patch:

		swinstall -x autoreboot=true -x match_target=true \
			-s /tmp/PHKL_28858.depot

	By default swinstall will archive the original software in
	/var/adm/sw/patch/PHKL_28858.  If you do not wish to retain a
	copy of the original software, you can create an empty file
	named /var/adm/sw/patch/PATCH_NOSAVE.

	WARNING: If this file exists when a patch is installed, the
	         patch cannot be deinstalled.  Please be careful
		 when using this feature.

	It is recommended that you move the PHKL_28858.text file to
	/var/adm/sw/patch for future reference.

	To put this patch on a magnetic tape and install from the
	tape drive, use the command:

		dd if=/tmp/PHKL_28858.depot of=/dev/rmt/0m bs=2k

Special Installation Instructions:
	This patch depends on base patch PHKL_17282.
	For successful installation, please ensure that PHKL_17282
	is in the same depot with this patch, or PHKL_17282 is
	already installed.