Patch Name: PHKL_13918 Patch Description: s700 10.24 (VVOS) ITE Locking Creation Date: 98/01/26 Post Date: 98/02/05 Hardware Platforms - OS Releases: s700: 10.24 Products: N/A Filesets: OS-Core.CORE-KRN ProgSupport.C-INC Automatic Reboot?: Yes Status: General Release Critical: Yes PHKL_13918: HANG Based on HP-UX patch PHKL_11205: HANG Path Name: /hp-ux_patches/s700/10.X/PHKL_13918 Symptoms: PHKL_13918: Repackaged HP-UX patch PHKL_11205 for VVOS. Based on HP-UX patch PHKL_11205: The CDE dtlogin screen can grab the graphics display lock and hold this lock until someone logs in. If the system console was on the Internal Terminal Emulator (ITE) running on this graphics display, processes writing to the system console that specify blocking I/O could block until dtlogin releases the lock. Also, if the ITE hard reset sequence Ctl-Shift-Reset were to be entered during a small timing interval while the X server is initializing, the X server display could remain black after the server has started. WARNING: Before running the X server after this patch is installed, The X server patch PHSS_13919 must be installed. If the system is used for X graphics, It is highly recommended that patch PHSS_13919 be installed first, before installing this kernel patch. Failure to install the X server patch could result in a graphics card hang while X windows is running. Based on portions of HP-UX patch PHKL_10758: Enhancements to support VISUALIZE-FX hardware. This patch is part of the Workstation Additional Core Enhancements for HP-UX 10.20 - July 1997 package. Defect Description: PHKL_13918: Repackaged HP-UX patch PHKL_11205 for VVOS. NOTE: Although patch PHKL_11205 refers to VISUALIZE-FX, this feature is not supported on 10.24. Based on HP-UX patch PHKL_11205: When the system console is on the Internal Terminal Emulator (ITE) of a graphics display, and the CDE dtlogin screen is waiting for someone to log in, processes writing to the system console using non-blocking I/O could block until someone logs in to the system. This patch makes ITE functionality developed for VISUALIZE-FX graphics devices available on the following graphics devices: Color Graphics Card, CRX, CRX48Z, Dual CRX, HCRX, HCRX-24, HCRX-24B, HCRX8-B, and VISUALIZE-EG. With this patch, ITE can be switched off when the X server starts, and then switched on again when the server exits. WARNING: Before running the X server after this patch is installed, The X server patch PHSS_13919 must be installed. If the system is used for X graphics, It is highly recommended that patch PHSS_13919 be installed first, before installing this kernel patch. Failure to install the X server patch could result in a graphics card hang while X windows is running. Based on portions of HP-UX patch PHKL_10758: Enhancements to support VISUALIZE-FX hardware. SR: 1653208751 1653205245 4701354829 Patch Files: /usr/conf/graf/frameb_spc.h /usr/conf/graf/gpu_data.h /usr/conf/graf/graph3.h /usr/conf/graf/ite.h /usr/conf/graf/stirom.h /usr/conf/h/framebuf.h /usr/conf/lib/libhp-ux.a(framebuf.o) /usr/conf/lib/libhp-ux.a(graf.o) /usr/conf/lib/libhp-ux.a(graph3.o) /usr/conf/lib/libhp-ux.a(ite.o) /usr/conf/lib/libhp-ux.a(ite1.o) /usr/conf/lib/libhp-ux.a(ite1_sti.o) /usr/conf/lib/libhp-ux.a(ite_color.o) /usr/conf/lib/libhp-ux.a(ite_parse.o) /usr/conf/lib/libhp-ux.a(ite_scroll.o) /usr/conf/lib/libhp-ux.a(kbd_code.o) /usr/conf/lib/libhp-ux.a(ktest.o) /usr/conf/lib/libhp-ux.a(stirom.o) /usr/conf/lib/libhp-ux.a(vm_ioblk.o) /usr/include/sys/framebuf.h what(1) Output: /usr/conf/lib/libhp-ux.a(framebuf.o): $Source: kern/graf/framebuf.c, hpuxsysgraf, vvos_dav is, davis88 $ $Date: 98/01/27 14:58:28 $ $Re vision: 1.12 PATCH_10.24 (PHKL_13918) $ /usr/conf/lib/libhp-ux.a(graf.o): graf.c $Date: 97/05/02 02:33:32 $ $Revision: 1.4. 98.2 $ PATCH_10.20 (PHKL_10758) /usr/conf/lib/libhp-ux.a(graph3.o): graph3.c $Date: 97/06/12 18:56:31 $ $Revision: 1. 9.98.11 $ PATCH_10.20 (PHKL_11205) /usr/conf/lib/libhp-ux.a(ite.o): ite.c $Date: 97/06/02 19:24:58 $ $Revision: 1.23. 98.4 $ PATCH_10.20 (PHKL_11205) /usr/conf/lib/libhp-ux.a(ite1.o): ite1.c $Date: 97/06/12 19:02:04 $ $Revision: 1.5. 98.5 $ PATCH_10.20 (PHKL_11205) /usr/conf/lib/libhp-ux.a(ite1_sti.o): ite1_sti.c $Date: 97/06/02 19:23:02 $ $Revision: 1.5.98.4 $ PATCH_10.20 (PHKL_11205) /usr/conf/lib/libhp-ux.a(ite_color.o): ite_color.c $Date: 97/06/02 19:25:34 $ $Revision: 1.8.98.3 $ PATCH_10.20 (PHKL_11205) /usr/conf/lib/libhp-ux.a(ite_parse.o): ite_parse.c $Date: 97/06/02 19:27:00 $ $Revision: 1.7.98.3 $ PATCH_10.20 (PHKL_11205) /usr/conf/lib/libhp-ux.a(ite_scroll.o): ite_scroll.c $Date: 97/06/02 19:27:46 $ $Revision : 1.14.98.4 $ PATCH_10.20 (PHKL_11205) /usr/conf/lib/libhp-ux.a(kbd_code.o): kbd_code.c $Date: 97/05/02 02:37:29 $ $Revision: 1.13.98.2 $ PATCH_10.20 (PHKL_10758) /usr/conf/lib/libhp-ux.a(ktest.o): $Source: kern/ktest/ktest.c, hpuxsysmisc, vvos_davis , davis88 $ $Date: 98/01/27 14:58:29 $ $Revi sion: 1.5 PATCH_10.24 (PHKL_13918) $ /usr/conf/lib/libhp-ux.a(stirom.o): stirom.c $Date: 97/06/12 18:58:03 $ $Revision: 1. 5.98.6 $ PATCH_10.20 (PHKL_11205) /usr/conf/lib/libhp-ux.a(vm_ioblk.o): vm_ioblk.c $Date: 97/05/02 02:31:21 $ $Revision: 1.8.98.5 $ PATCH_10.20 (PHKL_10758) /usr/conf/graf/frameb_spc.h: frameb_spc.h $Date: 97/05/02 02:37:44 $ $Revision: 1.7.98.2 $ PATCH_10.20 (PHKL_10758) frameb_spc.h $Date: 97/05/02 02:37:44 $ $Revision: 1.7.98.2 $ PATCH_10.20 (PHKL_10946) /usr/conf/graf/gpu_data.h: gpu_data.h $Date: 97/05/02 02:37:45 $ $Revision: 1.11.98.3 $ PATCH_10.20 (PHKL_10758) gpu_data.h $Date: 97/05/02 02:37:45 $ $Revision: 1.11.98.3 $ PATCH_10.20 (PHKL_10946) /usr/conf/graf/graph3.h: graph3.h $Date: 97/05/02 02:37:47 $ $Revision: 1. 5.98.2 $ PATCH_10.20 (PHKL_10758) graph3.h $Date: 97/05/02 02:37:47 $ $Revision: 1. 5.98.2 $ PATCH_10.20 (PHKL_10946) /usr/conf/graf/ite.h: ite.h $Date: 97/06/02 19:24:00 $ $Revision: 1.16. 98.4 $ PATCH_10.20 (PHKL_11205) ite.h $Date: 97/06/02 19:24:00 $ $Revision: 1.16. 98.4 $ PATCH_10.20 (PHKL_11212) /usr/conf/graf/stirom.h: stirom.h $Date: 97/06/12 19:01:04 $ $Revision: 1. 6.98.4 $ PATCH_10.20 (PHKL_11205) stirom.h $Date: 97/06/12 19:01:04 $ $Revision: 1. 6.98.4 $ PATCH_10.20 (PHKL_11212) /usr/conf/h/framebuf.h: framebuf.h $Date: 97/05/02 02:32:22 $ $Revision: 1.17.98.2 $ PATCH_10.20 (PHKL_10758) framebuf.h $Date: 97/05/02 02:32:22 $ $Revision: 1.17.98.2 $ PATCH_10.20 (PHKL_10946) /usr/include/sys/framebuf.h: framebuf.h $Date: 97/05/02 02:32:22 $ $Revision: 1.17.98.2 $ PATCH_10.20 (PHKL_10758) framebuf.h $Date: 97/05/02 02:32:22 $ $Revision: 1.17.98.2 $ PATCH_10.20 (PHKL_10946) cksum(1) Output: 2050658403 47952 /usr/conf/lib/libhp-ux.a(framebuf.o) 3042162750 237700 /usr/conf/lib/libhp-ux.a(graf.o) 3145020434 44856 /usr/conf/lib/libhp-ux.a(graph3.o) 4223044191 17564 /usr/conf/lib/libhp-ux.a(ite.o) 2434149091 10660 /usr/conf/lib/libhp-ux.a(ite1.o) 1362617690 8992 /usr/conf/lib/libhp-ux.a(ite1_sti.o) 231449308 2268 /usr/conf/lib/libhp-ux.a(ite_color.o) 1481353007 9528 /usr/conf/lib/libhp-ux.a(ite_parse.o) 2660541503 37756 /usr/conf/lib/libhp-ux.a(ite_scroll.o) 4059109777 13712 /usr/conf/lib/libhp-ux.a(kbd_code.o) 1262810679 23672 /usr/conf/lib/libhp-ux.a(ktest.o) 2830599729 18400 /usr/conf/lib/libhp-ux.a(stirom.o) 935540915 5956 /usr/conf/lib/libhp-ux.a(vm_ioblk.o) 2693873304 729 /usr/conf/graf/frameb_spc.h 967811602 11437 /usr/conf/graf/gpu_data.h 1296211729 15474 /usr/conf/graf/graph3.h 3797053681 15857 /usr/conf/graf/ite.h 3916226615 31319 /usr/conf/graf/stirom.h 3973157529 18362 /usr/conf/h/framebuf.h 3973157529 18362 /usr/include/sys/framebuf.h Patch Conflicts: None Patch Dependencies: None Hardware Dependencies: None Other Dependencies: None Supersedes: None Equivalent Patches: PHKL_13929: s800: 10.24 PHKL_11205: s700: 10.20 PHKL_11212: s800: 10.20 Patch Package Size: 640 KBytes Installation Instructions: Please review all instructions and the Hewlett-Packard SupportLine User Guide or your Hewlett-Packard support terms and conditions for precautions, scope of license, restrictions, and, limitation of liability and warranties, before installing this patch. ------------------------------------------------------------ 1. Back up your system before installing a patch. 2. Login as root. 3. Copy the patch to the /tmp directory. 4. Move to the /tmp directory and unshar the patch: cd /tmp sh PHKL_13918 5a. For a standalone system, run swinstall to install the patch: swinstall -x autoreboot=true -x match_target=true \ -s /tmp/PHKL_13918.depot 5b. For a homogeneous NFS Diskless cluster run swcluster on the server to install the patch on the server and the clients: swcluster -i -b This will invoke swcluster in the interactive mode and force all clients to be shut down. WARNING: All cluster clients must be shut down prior to the patch installation. Installing the patch while the clients are booted is unsupported and can lead to serious problems. The swcluster command will invoke an swinstall session in which you must specify: alternate root path - default is /export/shared_root/OS_700 source depot path - /tmp/PHKL_13918.depot To complete the installation, select the patch by choosing "Actions -> Match What Target Has" and then "Actions -> Install" from the Menubar. 5c. For a heterogeneous NFS Diskless cluster: - run swinstall on the server as in step 5a to install the patch on the cluster server. - run swcluster on the server as in step 5b to install the patch on the cluster clients. By default swinstall will archive the original software in /var/adm/sw/patch/PHKL_13918. If you do not wish to retain a copy of the original software, you can create an empty file named /var/adm/sw/patch/PATCH_NOSAVE. Warning: If this file exists when a patch is installed, the patch cannot be deinstalled. Please be careful when using this feature. It is recommended that you move the PHKL_13918.text file to /var/adm/sw/patch for future reference. To put this patch on a magnetic tape and install from the tape drive, use the command: dd if=/tmp/PHKL_13918.depot of=/dev/rmt/0m bs=2k Special Installation Instructions: WARNING: Before running the X server after this patch is installed, The X server patch PHSS_13919 must be installed. If the system is used for X graphics, It is highly recommented that patch PHSS_13919 be installed first, before installing this kernel patch. Failure to install the X server patch could result in a graphics card hang while X windows is running. Due to the number of objects in this patch, the customization phase of the update may take more than 10 minutes. During that time the system will not appear to make forward progress, but it will actually be installing the objects.