ASUS P3B-F Intel 440BX AGPset with ATX form factor

The ASUS P3B-F is based on the Intel 440BX AGPset with ATX form factor for the latest support in Intel's Pentium III family, existing Pentium II and other high-end Intel Celeron^TM processors. This unique Slot 1 mainboard now comes with JumperFree^TM BIOS for the ease of setting and overclocking CPU, and Suspend-to-RAM for maximum power savings (< 5W) when PC is switched on over long periods of time. This mainboard is also compliant with PC ' 99, and equipped with heaps of other intelligent features and spaces for future expansion.

Processor
	Slot 1 for Intel Pentium III/ II 233MHz~450+MHz or Celeron^TM SEPP (Singled-Edge) Processor
Chipset
	Intel 440BX AGPSet Support and PIIX4E South Bridge
System Memory
	4 x 168-pin DIMMs Sockets Support 8MB to 1024MB Memory Capacity.
	PC100 SDRAM 8/16/32/64/128/256MB 168-pin SDRAM, ECC supported
AGP Slot
	Supports 2X Mode AGP 66/133MHz (Sideband) 3.3V Device
On Board IDE & Floppy Connectors
	2 x UltraDMA/33 Bus Master IDE Ports (Up to 4 IDE Devices). Support UltraDMA/33 : 33MB/Sec (Max)
	ATAPI IDE CD-ROM & LS-120 Supported
	1 x Floppy Port (3 Mode, up to 2.88MB)
PC Health Monitoring
	PC Health Monitoring ASIC Supports CPU Voltage, Fan Status, and System Temperature Detection
	Intel LDCM S/W and ASUS PC Probe Utility Bundled
Smart Slots for Expansion Flexibility*
	6 Pure PCI Slots* compliant with PC ' 99 Requirement
	6 PCI Slots* and 1 ISA Slot Provides Greatest Expansion
	5 PCI Slots* and 2 ISA Slots Ensures Legacy Compatibility
	Provide 4 DIMM Slots for Greatest Memory Capacity
PC ' 99 Compliant Colorful I/O
	1 x PS/2 Keyboard Port
	1 x PS/2 Mouse Port
	1 x Parallel Port (ECP, EPP Port)
	2 x USB Ports
	2 x Serial Ports
ATX Power Connector
	3V, 5V and 12V 20-pin ATX Power Connector, Soft Power Off Supported
Smart BIOS
	Allow Vcore Voltage and System Frequency Adjustable in BIOS without using traditional Jumper
	Provide Safe Limit for Dangerous Settings such as Vcore to prevent System Crash
	Bootup Block Write Protection against Virus Infection
	Support Suspend-To-RAM Function to Save Power
	IDE/SCSI HD/MO/ZIP/CD ROM/Floppy Bootup supported
	Still Keep Traditional DIP Adjustment
Other Advanced Features
	Message LED as a reminder to user not to plug or pull up add-on Cards while SB Power is on
	Fan Status/Temperature/Voltage Monitoring and Alert
	PS/2 Mouse/Keyboard/Modem Power Up Supported
Package Contents
	P3B-F Motherboard x 1
	Universal Retention Module x 1
	User's Manual x 1
	Driver CD x 1
	IDE Cable x 1
	Floppy Cable x 1
Board Size
	ATX Form Factor with size : 19.2cm x 30.4cm (7.55" x 12.0")
*(Note: means "Depending on Territory")**

�� web ��