TITLE: LSI SAS MegaRAID 8888ELP Firmware Utility

VERSION: 1.00 Rev. A
DESCRIPTION:
This package contains the LSI SAS MegaRAID 8888ELP Firmware Utility for the 
supported workstation models and operating systems. 

PURPOSE: Routine
SOFTPAQ NUMBER: SP38044
SUPERSEDES: None
EFFECTIVE DATE: December 10, 2007
CATEGORY: Utility - Tools
SSM SUPPORTED: No

PRODUCT TYPE(S):
Workstations

HARDWARE PRODUCT MODEL(S):
HP xw6600 Workstation: All Models
HP xw8600 Workstation: All Models

SOFTWARE PRODUCT(S):
None

OPERATING SYSTEM(S): 
Microsoft Windows Vista Business 32 Edition
Microsoft Windows Vista Business 64 Edition
Microsoft Windows XP Professional
Microsoft Windows XP Professional x64 Edition

LANGUAGE(S): 
Global

ENHANCEMENTS: 
- Provides the initial implementation of the LSI SAS MegaRAID 8888ELP Firmware 
Utility for the supported workstation models.

PREREQUISITES: 
None

INSTALLATION INSTRUCTIONS: 
To create a bootable HP USB Flash Disk that can be used for the LSI SAS 
MegaRAID 8888ELP Firwmare Utility, complete the following steps: 

1. Download the SoftPaq file and extract the package contents to a known 
location on your hard drive.
Example: C:\swsetup\SP38044

NOTE: Files that are extracted in Step 1 are as follows:
- dos4gw.exe
- fls_sas.bat
- MegaCli.exe
- SAS0356.rom

2. Click Start, then click Run, and then type CMD in the Open box to open a 
Command window.

3. Navigate to the directory where the SoftPaq files were extracted.
Example: cd c:\swsetup\SP38044

4. Insert the USB flash drive (drive key) that you want to use to create the 
bootable media, and make a note of the drive letter that is assigned to it by 
Microsoft Windows or Microsoft Windows Vista and copy the files to the drive.

CAUTION: Step 5 overwrites any existing data on the specified drive letter.

5. Create the bootable USB flash drive (drive key) by typing the following 
command:
mkusb :

6. Close the Command window.

7. Use the Microsoft Windows "Safely Remove Hardware" utility (in the system 
tray) to remove the USB Flash Drive from the computer. Using this utility 
ensures that the drive is synchronized before removal.

8. To use the LSI SAS MegaRAID 8888ELP Firwmare Utility, boot the workstation 
to the USB Flash Drive (drive key) that was created in Steps 1 through 7.

9. At the DOS prompt type:
`fls_sas.bat`

The updated script is executed and the new BIOS is installed.


Copyright (c) 2007 Hewlett-Packard Development Company, L.P.