SOFTPAQ NUMBER: SP3092
PART NUMBER: 276816-007, 276817-007
FILE NAME: N/A
TITLE: Peripheral Adapter Support Software for VINES 6.x, 7.x and 8.x
VERSION: 3.05
LANGUAGE: English

CATEGORY: Drivers

DIVISIONS: Servers

PRODUCTS AFFECTED: All Compaq Server products 

OPERATING SYSTEM: Banyan VINES 6.x, 7.x and 8.x

SYSTEM CONFIGURATION: N/A

EFFECTIVE DATE: SS 4.21

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SUPERSEDES: SP3090

DESCRIPTION:
    The Peripheral Adapter Support Software for VINES is a collection
    of VINES 6.x, 7.x & 8.x software components which provide support
    for Compaq Servers and Options.

VINES 8.x Constraints
---------------------
The PAT SSD 3.05 is supported in Uni-Processor mode only at this 
time. This SSD may not work correctly if the driver is installed 
and MP mode is enabled.


CHANGES FROM PREVIOUS RELEASE

Rev 3.03 : Compaq SMART Array Controller Driver.
	   Enhanced  the  existing  SMART-2/SMART  3100ES/SMART 
	   3200  Array Controller driver to support SMART 221
   	   Array Controller.

Rev 2.01 : Compaq SMART-2  and  Fibre  Channel  Configuration 
       	   Display Utility. 
	   The  existing utility has been enhanced to display 
	   SMART 221  Array Controller information on logical
	   configuration.

Rev 1.02 : Compaq Fibre Channel Controller driver
	   Enhanced the existing FIbre Channel Controller driver
	   to support Add on option  capabilities  to the Compaq
	   Fibre Channel storage system    .

The  install  script  has  been  changed to fix the problem of 
"Compaq Enhanced IDE controller  driver" not getting installed 
on ProLiant 6500. 



2.0 SOFTWARE COMPONENTS
 
    The software components contained in the SSD are device drivers
    and support  utilities.  A  device driver is  software that the
    operating system uses to  set up and  communicate with hardware
    devices.  The following list identifies each driver and utility
    contained  on the SSD  as well as  the Compaq specific hardware
    which it supports:

Drivers and controllers supported:

Rev 1.02 : Compaq Fibre Channel Controller driver
	   Supports  Compaq Fibre Channel (EISA / PCI) controllers
	   Supports events notifications
	   on VINES 6.x, 7.x & 8.x platforms.

   1) Rev 1.00 : Compaq  Fibre Channel  Host  Controller  supplement
	       Driver.
	       Provides  Additional Support  required  for  Compaq
	       Fibre Channel (EISA / PCI) Controllers on ISA / PCI
	       Systems on VINES 6.x, 7.x & 8.x platforms.

Rev 1.01 : Remote  Insight  Board  Driver for Banyan VINES 6.20(0)
	   and above.

Rev 3.03 : Compaq SMART Array  Controller Driver. 
	   Supports Compaq SMART-2 (PCI/EISA) controllers
	   Supports Compaq SMART-2/SL controllers
	   Supports Compaq SMART-2/DH controllers
 	   Supports Compaq SMART 3100ES Controllers
	   Supports Compaq SMART 3200 Controllers
	   Supports Compaq SMART 221 Controllers.
	   Supports logging  of  events  for Drive Array Subsystem
	   on VINES 6.00, 6.20 & above, 7.x & 8.x platforms.

   1) Rev 1.02 : Compaq  Additional  Package required  for  Compaq 
	         SMART Array Controller Driver on  VINES ver. 6.00,
		 6.20 & above,  7.x  & 8.x platforms.

   
Rev 1.22 : Compaq Fast-Wide and Wide-Ultra controller driver
	   Supports  Integrated Compaq 32-Bit Fast-Wide SCSI-2 and
	   add-on (EISA / PCI) controllers
	   Supports  Integrated  Compaq Wide-Ultra SCSI and add-on
	   (PCI) controllers
	   Supports  Integrated  Compaq  Dual  Channel  Wide-Ultra
	   SCSI-3 and add-on (PCI) controllers
	   Supports  logging   and  mailing  of  events  for  SCSI 
	   Subsystem on  VINES 6.x, 7.x & 8.x platforms.
 
   1) Rev 1.00 : Compaq  Supplemental  Fast-Wide   and  Wide-Ultra
		controller Driver on VINES 6.x,7.x & 8.x platforms.

Rev 1.22 : Compaq Enhanced IDE controller driver
	   Supports  IDE/EIDE hard drives and EIDE CD-ROM on VINES
	   6.x, 7.x & 8.x platforms.

Rev 2.03 : Compaq Wellness driver
	   Supports server health monitoring features on VINES 6.x
	   platforms.

Rev 3.02 : Compaq Wellness driver
	   Supports  server  health  monitoring  features on VINES
	   7.x  and 8.x platforms.

Rev 1.00 : Compaq Integrated Management Log driver
	   Supports  logging  of  events that occur in a system or
           its components.

Rev 1.00 : Banyan  IDA,  IDA-2, IAES & SMART SCSI Array controller
	   driver

Utilities provided in this SSD :

    1) Rev 1.01 : RI Agent.
       This  runs  as a  daemon and interacts with the RIB Driver,
       Health and  IDA  Agents  to  send  SNMP Traps to the Remote
       Insight  Board.   Additional   executable  of  RI  Agent is
       included which is compatible   with  Wellness  driver  v1.0
  
    2) Rev 1.03 : Health Agent.
       This  runs  as a daemon and monitors the Correctable Memory
       Errors, counts  and  informs  the  RI Agent to send an SNMP
       Trap  whenever a  Correctable  Memory  Error  occurs.  This
       agent  interacts   with   Wellness  driver   and   supports
       monitoring   of  various  server components and sends  Mail
       Alert  notification  whenever  a  status change is detected
       on  any of the  server components.  This  feature  will  be
       available only if the Compaq Wellness driver  version  2.00
       or above is installed in your system.
       Additional  executable  for Health  Agent is included which
       is compatible with Wellness driver version 1.0

    3) Rev 1.03 : IDA Agent.
       This  runs as a daemon and monitors the status of the Drive
       Array  configured on the server. It informs the RI Agent to
       send an SNMP Trap in case there is any change in the status
       of  the   logical,  physical and  spare drives.  This agent
       interacts  with  IDA  driver , SMART-2 driver and the Fibre 
       channel   driver  and   supports  monitoring   of   drives,
       Fans, Power-supplies and overheat condition in the subsystem  
       connected to  IDA , Compaq SMART-2 or Compaq  Fibre  channel
       family of Array controller and sends Mail Alert notification
       if any event  is detected.

    4) Rev 1.00 : Compaq ULS agent (CPQULS).
       This runs as a deamon and  monitors  the  status of devices,
       fans, power suplies  and  overheat  condition  of  the  SCSI
       subsystem.This agent  interacts  with  the  Compaq Fast-Wide 
       and  Wide-Ultra  Controller  Driver  and  sends  Mail  Alert
       notification in case of any events detected.

    5) Rev 1.00 : Compaq Ultra utility (CPQULTRA).
       This is a text based utility which allows the user to monitor
       the status of all the SCSI  Controllers and devices  present
       in the syatem. 

    6) Rev 1.0 :  RIVIEW. 
       This  is a  curses  based utility which  allows the user to
       monitor  the  Drive Array and  Correctable Memory status on
       the server.

    7) Rev 1.0 :  RICONFIG.
       This  is a  curses based  utility which  allows the user to
       view and on-line configure the Remote Insight Board.

    8) Rev 2.01 : Compaq SMART-2  and  Fibre Channel Configuration 
       Display Utility.
       On-line utility  to display SMART-2 and Fibre Channel Array  
       family of  controller information for Logical drives.  
       Run 'cpqs2' at Unix  prompt. "cpqs2 -h" gives the available 
       options for the utility.
					   
    9) Rev 1.01 : S. M. A. R. T (IDE/EIDE and SCSI) Agent
       Supports  monitoring of  S. M. A. R. T capable IDE/EIDE and 
       SCSI  drives  with Mail Alert  Notification to  the  system 
       administrator on a pre-failure notification.

    10) Rev 1.04 : Compaq System Management Utility.
       Server based utilities which support :
       Notification of network, storage and system health  failure
       events through Mail alerting mechanism.
       S. M. A. R. T support utility.
       Dynamic enable/disable of driver debug messages.
       Menu option to launch existing utilities -
          cpqs2, cpqnet, riview, riconfig, cpqultra
       View  critical/correctable error log
       View/Save cpqnetlog and cpqs2 output 
       View   Integrated   Management   Log

		   
       To  launch  Compaq  System  Management Utility, run 'cpqsm'
       at Unix prompt.


       NOTE : The  version  of 'cpqnetlog'  contained on "Ver 2.04
	      LAN Adapter  Support Software for VINES 6.0 and 7.0"
	      or  above  diskette  is  required  to  produce  mail
	      alerting for Redundant  Backup Pair  and  Standalone
	      network  interface   controller  failure/recoveries.
	      For  supported   controller  names  please  refer to
	      README.RBP  file available on  LAN  Adapter  Support
	      Software  for  VINES 6.0  and   7.0,   Documentation
	      Diskette.


  
HOW TO USE:

1. Obtain two formatted 1.44 MB diskettes.

2. Download  the  Softpaq  to  a directory on your hard drive and
   change to that directory.  The  file  that  is  downloaded  is
   SP3092.EXE.

3. From that drive and directory, execute the SoftPaq file:
   SP3092 [ENTER]
   The following files should be created:
   276816US._01
   276816US._02
   QRST5.EXE
   SP3092.TXT

4. To create the diskettes, at the DOS prompt run :
   QRST5 [ENTER]
   Follow the on-screen instructions, which prompt  you  when to
   insert  the  DOS  formatted  diskettes and allow you to print
   labels.

5. After the SSD diskettes  are  created,  you  may  delete  the
   downloaded file SP3092.EXE  and the other files it creates on
   the download directory if you wish.

6. Insert the documentation diskette(the second  diskette)  into
   drive A  and  perform  one  of  the  following  to  view  the
   installation instructions :
   From DOS prompt enter "a:\readme"
				or
   Boot the system with the diskette in the drive A:

Copyright 1998, Compaq Computer Corporation. All rights reserved.

Product  names  mentioned  herein   may  be  trademarks   and/or
registered trademarks of their respective companies.