TITLE: Promise FastTrak S150 TX4 SATA RAID Controller Driver

VERSION: 1.1.30.9 Rev. A
DESCRIPTION:
This contains the Promise FastTrak S150 TX4 SATA RAID Controller driver for the 
workstation models and operating systems listed. 

PURPOSE: Critical
SOFTPAQ NUMBER: SP25924
SUPERSEDES: None
EFFECTIVE DATE: November 19, 2003
CATEGORY: Driver - Storage
SSM SUPPORTED: No

PRODUCT TYPE(S):
Workstations

PRODUCT MODEL(S):
HP Workstation xw4100: All Models
HP Workstation xw6000: All Models
HP Workstation xw8000: All Models
HP Workstation xw8200: All Models

OPERATING SYSTEM(S): 
Windows 2000
Windows XP Professional

LANGUAGE(S): 
Global

ENHANCEMENTS: 
N/A

PREREQUISITES: 
N/A

HOW TO USE: 
1. Download the SoftPaq to a directory on your hard drive. The file that is 
downloaded is a self-extracting executable with a filename based on the SoftPaq 
Number above. 

2. From that drive and directory, execute the downloaded file and follow the 
on-screen instructions.  The self-extracting file will store the drivers in the 
C:\SWSETUP\FASTTRAK directory.

3. In Windows, go to Device Manager and select the Other Devices or SCSI and 
RAID Controllers, then right click the yellow bang mark Mass Storage Controller 
and select properties. Click on the Driver tab then click on Update the Driver. 
 When the Hardware Update Wizard window pops up, select "Install from a list or 
specific location (Advanced)".  Check the "Include this location in the search" 
then enter "C:\SWSETUP\FASTTRAK\<system os>" or browse for this location.  
Select the OS driver for the Promise FastTrak S150 TX4 series SATA RAID 
controller. Select NEXT.  The wizard will then indicate finish install of the 
'OS' Promise FastTrak S150 TX4 Series SATA RAID Controller, click on Finish.  
Click Close on driver window.  Under Device Manager/SCSI and RAID controllers a 
new device should be detected "'OS' Promise FastTrak S150 TX4 Series SATA RAID 
Controller".




Copyright (c) 2004 Hewlett-Packard Development Company, L.P.