SOFTPAQ NUMBER:  SP24921
PART NUMBER: 292498-405
FILE NAME:  N/A
TITLE:  Options ROMPaq Firmware Upgrade Diskette for the Hewlett-Packard
        Integrated Lights-Out Management Controller.

VERSION:  1.50
LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Systems

PRODUCTS AFFECTED:      ProLiant BL20p
			ProLiant BL20p G2
			ProLiant BL40p
                        ProLiant ML370 G3
                        ProLiant DL360 G2
			ProLiant DL360 G3
			ProLiant DL380 G3
			ProLiant DL560
                        ProLiant DL580 G2
			ProLiant DL740

OPERATING SYSTEM:  N/A

SYSTEM CONFIGURATION:  N/A

PREREQUISITE:  N/A

EFFECTIVE DATE:  January 7, 2004

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION: 2.X

SUPERSEDES: SP19817 (1.06), SP19846 (1.15), SP21861 (1.16), SP21863 (1.20), 
SP21888 (1.25), SP21938 (1.26), SP21992 (1.27), SP21940 (1.40), SP24873 (1.41),
SP24931 (1.42)

DESCRIPTION:   This release provides updated firmware for the latest
               maintenance releases of the Hewlett-Packard Integrated
               Lights-Out Management Controller.

New features -

1.  Terminal Services operating seamlessly with remote console in a pass-through 
    mode via the management port on Windows based servers.

2.  Evaluation license key for 30-day free evaluation of iLO Advanced features.

3.  Added keyboard model setting to Global Settings page and XML interface.

4.  Added capability to remote console hot key interface to specify key sequences
    Alt+SysRq and Right-Ctrl+ScrLk+ScrLk.

5.  Added XML command to disable login requirement to enter iLO RBSU.

6.  Added support of Sun JVM 1.4.2.


Problems fixed from last release -

1.  Corrected a SSL security vulnerability as described in Vulnerability
    Note VU#997481 (http://www.cert.org/).

2.  Corrected some XML responses which did not conform to XML standards.


Documentation -

1.  Updated iLO User Guide and Updated Information Booklet can also be found by
    following the links at:  http://www.hp.com/manage/ilo-description.html

2.  Passthrough Installation:

    In order to access Terminal Services through iLO, the Terminal Services
    Passthrough service and the iLO Management Interface Driver for 
    Windows 2000 / Windows Server 2003 must be installed on the server containing 
    the iLO. The service is available as a Smart Component on <www.hp.com>.  The iLO 
    driver is available as a Smart Components on <www.hp.com> and on the HP 
    SmartStart CD. It is also part of the ProLiant Support Pack for Microsoft 
    Windows Server 2003 and Microsoft Windows 2000.

    Install the driver first and then the service. If the service is already
    installed, then it must be manually restarted or the server rebooted once
    the driver is installed. To install the service, launch its component installer
    and follow the directions in the installation wizard. If installation is through
    iLO remote console and if Terminal Services passthrough is set to automatic, 
    then Terminal Services will be launched when the installation is complete.
    On Windows 2000, the Terminal Services server must be installed. This is done 
    through the Control Panel using Add or Remove Programs. On Windows Server 2003,
    you may instead turn on Remote Desktop sharing by selecting the Remote tab     
    under My Computer and Properties.

    On a pre-Windows XP client, the Terminal Services client must be installed.
    This is done by generating installation diskettes from a Terminal Services 
    server installation or by downloading the client from the Microsoft web site. 
    On Windows XP, Remote Desktop Connection is built in. Microsoft's license 
    requirements must be complied with and are the same as when connecting through
    the server's NIC. For instance, when set for administrative access, Terminal 
    Services will not allow more than two connections regardless of whether the 
    connections are through the server's NIC or iLO or both. Errors during 
    installation and during execution of the passthrough service will be logged
    in the server's Application Event Log. The passthrough service may be removed
    using Add or Remove Programs in the Control Panel.

HOW TO USE:

1.  Obtain two formatted 1.44 MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change to
    that directory.  The file that is downloaded is SP24921.EXE.

3.  From that drive and directory, execute the SoftPaq file:

SP24921 [ENTER]

You will be prompted to place each formatted 1.44 MB diskette into a diskette
drive to create the diskettes.  Be sure and note the first and second diskettes.

4.  After the diskettes are created, you may delete the downloaded file
    SP24921.EXE if you wish.

5.  Insert the first diskette in drive A: and cold boot the system.  The system will prompt
    you when the second diskette should be inserted.

Copyright 2003 Hewlett-Packard Development Company, L.P.

Hewlett-Packard and the Hewlett-Packard logo are trademarks of Hewlett-Packard
Development Company, L.P/ in the U.S. and/or other countries.