CrownAdmin 2 for UNIX              
                    Sun/SPARC SunOS 4.1.x
                        Installation
                        ============


CrownAdmin 2 allows you to configure your QMS printer and
perform network operations on printers connected to Ethernet 
and Token-Ring networks.

This readme file describes how to install CrownAdmin 2 for 
UNIX on a Sun/SPARC SunOS 4.1.x system from a CD-ROM.

>> Note: QMS provides CrownAdmin 2 software in several
   different media formats. If you require CrownAdmin 2 on
   some media other than CD-ROM, contact your QMS vendor for
   purchase information. You can also download CrownAdmin 2 
   via our World Wide Web Server at http://www.qms.com, our 
   Bulletin Board at (334) 633-3632, or CompuServe at 
   go qmsprint


Installation
------------
 1 Insert the CD-ROM in your CD-ROM drive.

   >> Note: Some drives require that the disk be placed in
      a caddy before being inserted in the drive. Check your
      CD-ROM drive documentation for information.  

 2 Logon the UNIX system as root.

 3 Type the following command to go to the root directory:

      cd / 

 4 If you already have a directory on the system named cdrom,
   skip to step 5.

   If you don't have a directory on the system named cdrom,
   type the following command to make one:

      mkdir /cdrom

 5 Mount the CD-ROM file system:

      mount -r -t hsfs device_filename /cdrom

   For device_filename substitute the complete pathname of
   the device associated with the CD-ROM drive. On SunOS
   systems, device_filename is usually /dev/sr0. If it 
   isn't, check your SunOS system documentation.

 6 Verify that the CD-ROM file system has been mounted by
   listing the contents of the directory:

      ls /cdrom

   The directory contains several subdirectories,
   including unix.

 7 Change to the location in which you want the
   CrownAdmin 2 directory to be created.

   >> Note: The directory in which crnadm.exe resides must 
      be able to be mounted by all network nodes that need 
      to access the printer.

 8 Extract the files from the CD-ROM:

      tar xvf /cdrom/unix/crnadm2/sunos/sunos.tar

   This creates a crnadm directory containing CrownAdmin 2.

 9 Unmount the CD-ROM file system: 

      umount device_filename

   For device_filename, substitute the complete pathname of 
   the device file associated with the CD-ROM drive.

10 Add the name of the directory containing crnadm (the 
   directory in which you extracted the sunos.tar file)
   to your path. 

11 Refer to the "QMS CrownNet Setup Guide" to configure the
   CrownNet interface and the network.

12 Run CrownAdmin 2 by typing 

      ./crnadm

>> Note: See the on-line user's guide for more information 
   on CrownAdmin 2 (from the Help menu in the main 
   CrownAdmin 2 window choose Contents).



Trademarks
----------
QMS is a registered trademark, and CrownAdmin is a trademark of 
QMS, Inc.

The following are trademarks or registered trademarks of their
respective owners: Sun, SPARC, SunOS/Sun; CompuServe/H&R Block.

Copyright (c) 1996 by QMS, Inc. All Rights Reserved.
QMS P/N 1810023-001A