CrownAdmin 2 for UNIX              
                    Sun/SPARC Solaris 2.4
                        Installation
                        ============


CrownAdmin 2 allows you to configure your QMS printer and
perform network operations on printers connected to Ethernet 
and Token-Ring networks.

This readme file describes how to install CrownAdmin 2 for 
UNIX on a Sun/SPARC Solaris 2.4 system from a CD-ROM.

>> Note: QMS provides CrownAdmin 2 software in several
   different media formats. If you require CrownAdmin 2 on
   some media other than CD-ROM, contact your QMS vendor for
   purchase information. You can also download CrownAdmin 2 
   via our World Wide Web Server at http://www.qms.com, our 
   Bulletin Board at (334) 633-3632, or CompuServe at 
   go qmsprint


Installation
------------
  1 Insert the CD-ROM in your CD-ROM drive.

    >> Note: Some drives require that the disk be placed in
       a caddy before being inserted in the drive. Check 
       your CD-ROM drive documentation for information.  
       Also, it takes a few seconds for the automounter to
       detect the CD.

  2 Logon the UNIX system as root.

  3 Type the following command to go to the root directory:

       cd / 

  4 Verify that the CD-ROM file system has been automounted 
    by listing the contents of the directory:

       ls /cdrom/qms

    The directory contains the several subdirectories,
    including unix.

  5 Change to the location in which you want the
    CrownAdmin 2 directory to be created.

    >> Note: The directory in which crnadm.exe resides must 
       be able to be mounted by all network nodes that need 
       to access the printer.

  6 Extract the files from the CD-ROM:

       tar xvf /cdrom/qms/unix/crnadm2/solaris/solaris.tar

    This creates a crnadm directory containing CrownAdmin 2. 

  7 Unmount the CD-ROM file system: 

       umount device_filename

    For device_filename, substitute the complete pathname of 
    the device file associated with the CD-ROM drive.

  8 Add the name of the directory containing crnadm (the 
    directory in which you extracted the solaris.tar file)
    to your path. 

  9 Refer to the "QMS CrownNet Setup Guide" to configure the
    CrownNet interface and the network.

 10 Run CrownAdmin 2 by typing 

       ./crnadm

>> Note: See the on-line user's guide for more information on 
   CrownAdmin 2 (from the Help menu in the main CrownAdmin 2
   window choose Contents).



Trademarks
----------
QMS is a registered trademark, and CrownAdmin and CrownNet are 
trademarks of QMS, Inc..

The following are trademarks or registered trademarks of their
respective owners: Sun, SPARC, Solaris/Sun, Inc.; CompuServe/
H&R Block.

Copyright (c) 1996 by QMS, Inc. All Rights Reserved.
QMS P/N 1810022-001A