CrownAdmin 2 for UNIX/HP-UX
                        Installation
                        ============


CrownAdmin 2 allows you to configure your QMS printer and
perform network operations on printers connected to Ethernet 
and Token-Ring networks.

This readme file describes how to install CrownAdmin 2 for 
UNIX on an HP-UX system from a CD-ROM.

>> Note: QMS provides CrownAdmin 2 software in several
   different media formats. If you require CrownAdmin 2
   on some media other than CD-ROM, contact your QMS vendor
   for purchase information. You can also download 
   CrownAdmin 2 via our World Wide Web Server at
   http://www.qms.com, our Bulletin Board at
   (334) 633-3632, or CompuServe at go qmsprint

 1 Insert the CD-ROM in the CD-ROM drive.

   >> Note: Some CD-ROM drives require that the disk be
      placed in a caddy before being inserted in the drive. 
      Check your CD-ROM documentation for information. 

 2 Logon the UNIX system as root.

 3 Go to the root directory by typing 

      cd /

 4 If you don't already have a CD-ROM mountpoint, create a
   root-level directory by typing

      mkdir /cdrom

 5 Mount the CD-ROM file system by typing

      mount -t cdfs device_filename /cdrom

   where device_filename is the complete pathname of the device
   file associated with the CD-ROM drive. If you're not sure of 
   this pathname, check your HP-UX documentation.

 6 Verify that the CD-ROM file system has been mounted by 
   listing the contents of the directory:

      ls /cdrom

   The directory contains several subdirectories,
   including unix.

 7 Change to the location in which you want the CrownAdmin 2
   directory to be created.

   >> Note: The directory in which crnadm.exe resides must 
      be able to be mounted by all network nodes that need 
      to access the printer.

 8 Extract the appropriate files from the CD-ROM.

   - If you're running HP-UX version 9.x, type

        tar xvf /cdrom/UNIX/CRNADM2/HP_UX/HP9.TAR

   - If you're running HP-UX version 10.x, type

        tar xvf /cdrom/UNIX/CRNADM2/HP_UX/HP10.TAR

   This creates a crnadm directory containing CrownAdmin 2.

   Note that a directory called hp will be created for the HP-UX
   version 9.x installation, and a directory called hp_10 will be 
   created for the HP-UX version 10.x installation.

 9 Unmount the CD-ROM file system: 

      umount device_filename

   For device_filename, substitute the complete pathname of 
   the device file associated with the CD-ROM drive.

10 Add the name of the directory containing crnadm (the 
   directory in which you extracted the hp9.tar or hp10.tar 
   file) to your path. 

11 Refer to the "QMS CrownNet Setup Guide" to configure the
   CrownNet interface and the network.

12 Run CrownAdmin 2 by typing 

      ./crnadm

>> Note: See the on-line user's guide for more information 
   on CrownAdmin 2 (from the Help menu in the main 
   CrownAdmin 2 window choose Contents).



Trademarks
----------
QMS is a registered trademark, and CrownAdmin is a trademark of 
QMS, Inc.

The following are trademarks or registered trademarks of their
respective owners: HP-UX/Hewlett-Packard, Inc.; CompuServe/
H&R Block.

Copyright (c) 1996 by QMS, Inc. All Rights Reserved.
QMS P/N 1810021-001A