CrownAdmin 2 for UNIX/AIX
                        Installation
                        ============

CrownAdmin 2 allows you to configure your QMS printer and
perform network operations on printers connected to Ethernet 
and Token-Ring networks.

This readme file describes how to install CrownAdmin 2 for 
UNIX on an AIX system from a CD-ROM.

>> Note: QMS provides CrownAdmin 2 software in several
   different media formats. If you require CrownAdmin 2
   on some media other than CD-ROM, contact your QMS 
   vendor for purchase information. You can also download 
   CrownAdmin 2 via our World Wide Web Server at
   http://www.qms.com, our Bulletin Board at (334) 633-3632, 
   or CompuServe at go qmsprint

 1 Insert the CD-ROM in the CD-ROM drive.

   >> Note: Some CD-ROM drives require that the disk be
      placed in a caddy before being inserted in the drive. 
      Check your CD-ROM documentation for information. 

 2 Logon the UNIX system as root.

 3 Go to the root directory by typing 

      cd /

 4 If you don't already have a CD-ROM mountpoint, create a
   root-level directory by typing

      mkdir /cdrom

 5 Mount the CD-ROM file system by typing

      mount -o ro -v cdrfs device_filename /cdrom

   where device_filename is the complete pathname of the 
   device file associated with the CD-ROM drive. If you're
   not sure of the pathname, check your AIX documentation.

 6 Verify that the CD-ROM file system has been mounted by 
   listing the contents of the directory:

      ls /cdrom

   The directory contains several subdirectories,
   including unix.

 7 Change to the location where you want the CrownAdmin 2
   directory to be created.

   >> Note: The directory in which crnadm.exe resides must 
      be able to be mounted by all network nodes that need 
      to access the printer.

 8 Extract the files from the CD-ROM:

      tar xvf /cdrom/unix/crnadm2/aix/aix.tar

   This creates a crnadm directory containing CrownAdmin 2.

 9 Unmount the CD-ROM file system: 

      umount device_filename

   For device_filename, substitute the complete pathname of 
   the device file associated with the CD-ROM drive.

10 Add the name of the directory containing crnadm (the 
   directory in which you extracted the aix.tar file)
   to your path. 

11 Refer to the "QMS CrownNet Setup Guide" to configure the
   CrownNet interface and the network.

12 Run CrownAdmin 2 by typing 

      ./crnadm

>> Note: See the on-line user's guide for more information 
   on CrownAdmin 2 (from the Help menu in the main 
   CrownAdmin 2 window choose Contents).



Trademarks
----------
QMS is a registered trademark, and CrownAdmin is a trademark of 
QMS, Inc.

The following are trademarks or registered trademarks of their
respective owners: AIX/IBM Corporation; CompuServe/H&R Block.

Copyright (c) 1996 by QMS, Inc. All Rights Reserved.
QMS P/N 1810020-001A