***********************************************************************
Windows NT 4.0 Device Driver v3.1.76                  February 27, 1997
***********************************************************************

PLEASE READ THIS FILE COMPLETELY BEFORE ATTEMPTING TO USE THIS PRODUCT!

***********************************************************************

Contents

1.0     Introduction
2.0     Installation Notes
3.0     Contacting ATI Technical Support 

*****************************

1.0     Introduction

This self-extracting file contains the latest ATI Windows NT 4.0 display
driver for the Microsoft Retail Release of the Windows NT 4.0 operating
system.

****************************

2.0     Installation Notes

This driver package contains:

  - ATI.SYS        (ATI Graphics miniport driver)
  - ATI.DLL        (ATI Graphics display  driver)
  - ATI.INF        (setup file used by Windows NT Setup program)
  - SSDPMS.SCR     (DPMS Screen Saver)
  - SSGPCDEF.HLP
  - SSGPCDEF.RSC
  - README.DEF
  - README.NT4     This README file

Procedure:

The Windows NT 4.0 Display Driver is installed and configured using the
standard Windows NT configuration utilities.

Procedure:

The Windows NT4.0 Display Driver is installed and configured using the
standard Windows NT configuration utilities.

1.  Start Windows NT.

2.  a) Select Run from the Start icon 
    OR 
    b) Use Windows Explorer to select NT40-176.EXE and skip Step #3.

3.  When asked for the file to run, enter NT40-176.EXE from the directory
    it was downloaded into. 

4.  Follow the instructions displayed to uncompress the installation
    files into C:\ATI\SUPPORT\NT40.

5.  Run the Windows NT Display program located in the Control Panel, under
    "Settings" in the Start menu. Alternatively, position the cursor on the
    background of the desktop, click the right mouse button, then select
    "Properties" from the popup menu.

6.  Select the "Settings" page.

7.  Select "Display Type...".

8.  Select "Change..." from the display options.

9.  Select "Have Disk..."

10. NT will prompt you for the correct path, enter C:\ATI\SUPPORT\NT40

11. A list of ATI graphics accelerators will be displayed. Select the 
    card you are using, then click on the "OK" button.

12. Windows NT will once again prompt for confirmation.  All appropriate
    files are then copied to your Windows directory.

13. Restart Windows NT.  Windows NT will start up using the new drivers.

14. NT will boot into a default mode and start the Display applet allowing
    for mode selection.

After successfully installing the driver, you can delete the contents of
the directory C:\ATI\SUPPORT\NT40 using the 'Remove ATI Temporary Files'
icon.

We recommend that you keep a copy of the NT40-176.EXE, in case you need
to install the driver again.

*****************************

3.0     Contacting ATI Technical Support 

ATI Technical Support                   Driver Download Sites
Support Telephone:      (905) 882-2626  World Wide Web:  www.atitech.ca
Support Facsimile:      (905) 882-0546  FTP:             ftp.atitech.ca
Compuserve Forum:           GO ATITECH  Download BBS:    (905) 764-9404       
Support Inquiries:           74740,667
General Inquiries:          76004,3656  Email:       support@atitech.ca

*****************************

For more information please see the file README.DEF

*****************************