SCSIworks! 1.3 Compatibility List CD-ROM Drives Apple CD-SC (Sony CDU-8001) CD-SC Plus (Sony CDU-8002) CD-150 (Sony CDU-8002) CD-300 (Sony CDU-8003) Power CD CD Technologies Porta-Drive (Toshiba 3201/3301/3401) Chinon CDS-431 CDX-431 CDX-435 CDX-535 Denon DRD-253 Goldstar GCD-R300 Hitachi CDR-1553S* CDR-1650 CDR-1750S* CDR-3650* CDR-3750 CDR-6750 IBM 3510* (CD-ROM I, CD-ROM II) Laser Magnetics CM212* CM214* CM231* MediaVision CDR-H93MV Reno NEC CDR-25 CDR-35 CDR-36 CDR-37 CDR-38 CDR-55 CDR-72 CDR-73 CDR-73M CDR-74 CDR-74-1 DR-80 CDR-82 CDR-83 CDR-83M CDR-84 CDR-84-1 CDR-210 CDR-400 CDR-500 CDR-510 CDR-600 CDR-900 (NEC 3Xe, 3Xi, 3Xp, 4xPro) CDR-401 CDR-501 Panasonic CR-501-S CR-503 Philips CM-425A CM215 Pioneer DRM-600 DRM-600A* DRM-604x* 6-disc changer Plextor 4Plex Sanyo CRD-400I Smart & Friendly CD-600 CD-800 HS-1200 HS-2200 SFD-21 Sony CDU-541 CDU-561 CDU-6110 CDU-6111 CDU-6211 CDU-6811 CDU-7211 CDU-8012 Teac CD-50 Texel DM-3010 DM-3020 DM-3021 DM-3022 DM-3024 DM-3028 DM-3110 DM-3120 DM-5010 DM-5020 DM-5021 DM-5022 DM-5024 DM-5028 Toshiba XM-3201 XM-3301 XM-3401 XM-5100A SCSIworks! CD-ROM drivers default to SCSI-2 mode, so will support all new CD-ROM drives that are SCSI-2 compliant. Note that not all CD-ROM drives support all possible operations, especially Photo CD and audio operations. Hard Disk Drives Trantor's hard disk driver supports virtually all available embedded-SCSI hard disk drives that will spin up when power is applied. Magneto-Optical Drives (512 Byte Media) Fujitsu M2511A Panasonic LF-3004 IBM MD-3125A* Ricoh 3010 5030E 5030E2 5031E Maxoptix Tahiti I Tahiti II Tahiti III Sharp JY7000 MOST RMD-5100-S 5200 Sony SMO-301 SMO-501 Olympus MOS-300E Teac OD-3000 Optimum 750 Removable-Media Devices Bernoulli 45 90** Quadram QuadFLEXTRA Insite Floptical SyQuest 44 88 Iomega Floptical* Teac 3 1/2" & 5 1/4" SCSI floppy drives (FD-55GS, FD-235JS) Scanners Hewlett-Packard ScanJet IIp ScanJet IIc Other scanner manufacturers that provide ASPI drivers will also work with the Trantor ASPI Managers. * These SCSI devices do not provide termination power, and therefore will not work with the APA-338 MiniSCSI, APA-348 MiniSCSI Plus or APA-358 MiniSCSI EPP adapters, unless daisy-chained with other SCSI devices which provide termination power ** Some Bernoulli 90 Pro portable models do not provide termination power, and therefore will not work with the APA-338 MiniSCSI, APA-348 MiniSCSI Plus or APA-358 MiniSCSI EPP adapters, unless daisy-chained with other SCSI devices which provide termination power. Contact Iomega Corporation for details about availability of termination power on specific models and for information on internal term power jumpers. Information supplied by Adaptec, Inc. is believed to be accurate and reliable, but Adaptec assumes no responsibility for any errors that may appear in this Support List. Adaptec, Inc. reserves the right, without notice, to make any change in product design or specification.