To   : Bob
         From : Keith
         File : flop48tpi.text

         How to make and write 48 TPI 5-1/4 inch floppy diskettes


         1) Format the floppy on the IBM PC with a double-sided
            diskette drive under the P-system.

               a) run the turnkey format program
               b) format 8 sectors per track

         2) Put the floppy in the Concept 5-1/4 inch floppy
            drive.

         3) run /CCUTIL/FUTIL

         4) press Configure, function key F3

         5) press TPI, function key F5

               a) This makes the driver read and write 48 TPI
                  floppies.

         6) press Sec/Trk, function key F6

               b) Type 8, for 8 sectors per track.

         7) press Exit, function key F10, twice.

         8) The floppy system is now usable with the formatted
            floppy.  You can copy files between the hard disks
            and the floppy diskette  using CopyFile in the
            FileManager.

         9) When finished with the 48 TPI floppies set the
            system bakc to it's default configuration.  To
            make the system work with the default floppy
            configuration :

               a) run /CCUTIL/FUTIL

               b) press Configure, function key F3

               c) press TPI, function key F5. This makes the
                  driver read and write 96 TPI floppies.

               d) press Sec/Trk, function key F6, then type
                  RETURN.  This sets sectors per track back to
                  the default of 9.

               e) press Exit, function key F10, twice.