# Makefile.in generated by automake 1.7.9 from Makefile.am.
# libraries/Makefile.  Generated from Makefile.in by configure.

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



##############################################################################
#               Makefile.am
#
# Process this file with automake to produce Makefile.in
#
# from Persistence of Vision(tm) Ray Tracer version 3.6.
# Copyright 1991-2003 Persistence of Vision Team
# Copyright 2003-2004 Persistence of Vision Raytracer Pty. Ltd.
#---------------------------------------------------------------------------
# NOTICE: This source code file is provided so that users may experiment
# with enhancements to POV-Ray and to port the software to platforms other
# than those supported by the POV-Ray developers. There are strict rules
# regarding how you are permitted to use this file. These rules are contained
# in the distribution and derivative versions licenses which should have been
# provided with this file.
#
# These licences may be found online, linked from the end-user license
# agreement that is located at http://www.povray.org/povlegal.html
#---------------------------------------------------------------------------
# This program is based on the popular DKB raytracer version 2.12.
# DKBTrace was originally written by David K. Buck.
# DKBTrace Ver 2.0-2.12 were written by David K. Buck & Aaron A. Collins.
##############################################################################

# Makefile.am for the source distribution of POV-Ray 3.6 for UNIX
# Written by Nicolas Calimet <pov4grasp@free.fr>

srcdir = .
top_srcdir = ..

pkgdatadir = $(datadir)/povray
pkglibdir = $(libdir)/povray
pkgincludedir = $(includedir)/povray
top_builddir = ..

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = u:/bin/install.exe
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_triplet = i386-pc-os2-emx
ACLOCAL = ${SHELL} U:/progetti/povray-3.6.1/config/missing --run aclocal-1.7
AMDEP_FALSE = #
AMDEP_TRUE = 
AMTAR = tar.exe
AUTOCONF = ${SHELL} U:/progetti/povray-3.6.1/config/missing --run autoconf
AUTOHEADER = ${SHELL} U:/progetti/povray-3.6.1/config/missing --run autoheader
AUTOMAKE = ${SHELL} U:/progetti/povray-3.6.1/config/missing --run automake-1.7
AWK = gawk
C99_COMPATIBLE_RADIOSITY = 
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS =  -pipe -O3 -march=i686 -mtune=i686 -malign-double -minline-all-stringops -D__EMX__ -DOS2  -D__ST_MT_ERRNO__ -g
COMPILED_BY = Mentore Siesto <mentore.siesto@alice.it>
CPLUS_INCLUDE_PATH = U:/USR/local452/include/c++/452
CPP = gcc -E
CPPFLAGS = 
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS =  -pipe -Wno-multichar -O3 -march=i686 -mtune=i686 -malign-double -minline-all-stringops -D__EMX__ -DOS2 -D__ST_MT_ERRNO__ -g
CYGPATH_W = echo
C_INCLUDE_PATH = U:/USR/local452/lib/gcc/i386-pc-os2-emx/452/include
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
ECHO_C = \c
ECHO_N = 
ECHO_T = 
EGREP = grep -E
EXEEXT = .exe
INCJPEG = -I$(top_srcdir)/libraries/jpeg
INCPNG = -I$(top_srcdir)/libraries/png
INCTIFF = -I$(top_srcdir)/libraries/tiff/libtiff -I$(top_builddir)/libraries/tiff/libtiff
INCZ = -I$(top_srcdir)/libraries/zlib
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
LDFLAGS = -Zexe -Zomf -Zmap -Zargs-wild -D__ST_MT_ERRNO__
LIBJPEG = ../libraries/jpeg/libjpeg.a
LIBOBJS = 
LIBPNG = ../libraries/png/libpng.a
LIBS =  -lm
LIBTIFF = ../libraries/tiff/libtiff/libtiff.a
LIBZ = ../libraries/zlib/libz.a
LTLIBOBJS = 
MAINT = #
MAINTAINER_MODE_FALSE = 
MAINTAINER_MODE_TRUE = #
MAKEINFO = makeinfo --no-split
OBJEXT = o
PACKAGE = povray
PACKAGE_BUGREPORT = pov4grasp@free.fr
PACKAGE_NAME = POV-Ray
PACKAGE_STRING = POV-Ray 3.6.1
PACKAGE_TARNAME = povray
PACKAGE_VERSION = 3.6.1
PATH_SEPARATOR = ;
POVLIBS = zlib png jpeg tiff/port tiff/libtiff
POVLIBSCLEAN = zlib png jpeg  tiff
RANLIB = echo
SET_MAKE = 
SHELL = sh
STRIP = 
VERSION = 3.6.1
VERSION_BASE = 3.6
X_CFLAGS = 
X_EXTRA_LIBS = 
X_LIBS = 
X_PRE_LIBS = 
ac_ct_CC = gcc
ac_ct_CXX = 
ac_ct_RANLIB = echo
ac_ct_STRIP = 
am__fastdepCC_FALSE = #
am__fastdepCC_TRUE = 
am__fastdepCXX_FALSE = #
am__fastdepCXX_TRUE = 
am__include = include
am__leading_dot = .
am__quote = 
bindir = ${exec_prefix}/bin
build = i386-pc-os2-emx
build_alias = 
build_cpu = i386
build_os = os2-emx
build_vendor = pc
datadir = ${prefix}/share
exec_prefix = ${prefix}
host = i386-pc-os2-emx
host_alias = 
host_cpu = i386
host_os = os2-emx
host_vendor = pc
includedir = ${prefix}/include
infodir = ${prefix}/info
install_sh = U:/progetti/povray-3.6.1/config/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localstatedir = ${prefix}/var
mandir = ${prefix}/man
oldincludedir = /usr/include
prefix = /usr/local
program_transform_name = s,x,x,
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
subdirs =  libraries/zlib libraries/png libraries/jpeg libraries/tiff
sysconfdir = ${prefix}/etc
target_alias = 

# Libraries to build.
SUBDIRS = zlib png jpeg tiff/port tiff/libtiff

# Libraries to clean with 'make distclean'.
DIST_SUBDIRS = zlib png jpeg  tiff
subdir = libraries
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/conf.h
CONFIG_CLEAN_FILES =
depcomp =
am__depfiles_maybe =
DIST_SOURCES =

RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \
	ps-recursive install-info-recursive uninstall-info-recursive \
	all-recursive install-data-recursive install-exec-recursive \
	installdirs-recursive install-recursive uninstall-recursive \
	check-recursive installcheck-recursive
DIST_COMMON = $(srcdir)/Makefile.in Makefile.am
all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in: # Makefile.am  $(top_srcdir)/configure.ac $(ACLOCAL_M4)
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  --ignore-deps libraries/Makefile
Makefile: # $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
uninstall-info-am:

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ETAGS = etags
ETAGSFLAGS =

CTAGS = ctags
CTAGSFLAGS =

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if (etags --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	else \
	  include_option=--include; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$tags$$unique" \
	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	     $$tags $$unique

ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = ..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
check-am: all-am
check: check-recursive
all-am: Makefile
installdirs: installdirs-recursive
installdirs-am:
install-exec: install-exec-recursive
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

info: info-recursive

info-am:

install-data-am:

install-exec-am:

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-info-am

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \
	clean-generic clean-recursive ctags ctags-recursive distclean \
	distclean-generic distclean-recursive distclean-tags distdir \
	dvi dvi-am dvi-recursive info info-am info-recursive install \
	install-am install-data install-data-am install-data-recursive \
	install-exec install-exec-am install-exec-recursive \
	install-info install-info-am install-info-recursive install-man \
	install-recursive install-strip installcheck installcheck-am \
	installdirs installdirs-am installdirs-recursive \
	maintainer-clean maintainer-clean-generic \
	maintainer-clean-recursive mostlyclean mostlyclean-generic \
	mostlyclean-recursive pdf pdf-am pdf-recursive ps ps-am \
	ps-recursive tags tags-recursive uninstall uninstall-am \
	uninstall-info-am uninstall-info-recursive uninstall-recursive


# Don't recurse in the subdirectories for 'make maintainer-clean'
# since some libraries might not have this target (e.g. libtiff).
# These subdirectories should be cleaned first by 'make clean'.
maintainer-clean: DIST_SUBDIRS=

# Create an empty target for 'make dist'; ignore automake warning about it.
# The whole directory is distributed through EXTRA_DIST at the top level.
distdir:
	@:

# Replaces the install target for 'make install'.
install: all

# Creates an empty install target for 'make uninstall'.
uninstall:

# Don't recurse in the subdirectories for 'make check'.
check: SUBDIRS=
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
