prgname
Program not loaded.



:Enter the startblock (DEC)	:Enter the endblock (DEC)	:Are you sure you wish to load?
Load block (0000) to (0000).Length: (0000) blocks,[$00000000] bytes.
Load the program?
Hold on.Loading.

The File is longer than the buffer! 

Press the left-mousebutton to continue!

left-mousebutton: Yes     right-mousebutton: No
A loader routine has been detected.

No loader routine was detected.
Bootblock loaded.Scan Completed:

**ERROR:Not enough (Chip) memory!
**ERROR:Error while freeing memory!
Segment offset:		[$00000000]
Segment loadadress:	[$00000000]
Segment length:		[$00000000]

The Length of the bootleg program is:		[$00000000]



No Bootleg 2.1 routines detected.
Current bufferlength:	[$00000000] bytes.
Buffer startadress:	[$00000000]
Buffer endadress:	[$00000000]
The buffer can hold (0000) blocks...



Welcome to TRACKRIPPER II,version 04-01-1990
This version will also rip Bootleg V2.1 programs!
Programmer:
  Roger Heykoop           
  Hageveldlaan 1          
  2071 TJ Santpoort-Noord 
  HOLLAND                 
Tel.:     023-376604      

Startadresses of Trackripper II:
Code Hunk  (FAST):	[$00000000],Endadress:	[$00000000]
Data Hunk 1(FAST):	[$00000000],Endadress:	[$00000000]
BSS Hunk  1(CHIP):	[$00000000],Endadress:	[$00000000]
BSS Hunk  2(FAST):	[$00000000],Endadress:	[$00000000]
Enter the drive number 0,1,2 or 3:DF0: selected as load drive.
Absolute jump (JSR) found to adress:	[000000000] Possible startadress.

Absolute jump (JMP) found to adress:	[000000000] Possible startadress.
The load-adress is:			[000000000]
The length of the ripped program is:	[000000000] bytes.
The position on the disk is: 		[000000000] bytes from the start.
Startblock:			[0000]
Endblock:			[0000]
Length in blocks:		[0000]
'#' or '$' NOT found at beginning of line! Retry!
If you enter the adresses,begin with # or $,
to indicate the DEC or HEX mode.
Available adresses:
 $40000- $7ffff		 (CHIP) and
$200000-$9fffff/$c00000-$dfefff (FAST)
Enter the hexadecimal numbers IN CAPS!

Please enter the buffer startadress: 
Please enter the buffer size: 
CON:40/40/560/120/TRACKRIPPER INPUT WINDOW


** Error Message **
** Memory allocation failed.Insufficient free  store.Try lower buffer value.
CON:0/060/640/140/TRACKRIPPER OUTPUT WINDOW



TRACKRIPPER II by ROGER/VIRUS



Program
Save Buffer
Change drive number
QUIT
Ripping
Automatic Rip
Manual sectorload
Buffer
Show buffer
Set Size (Default 160000)
Attempt decrunch